RFX2411N Datasheet, PDF (3/9 Pages) Skyworks Solutions Inc. – 2.4 GHz TX / RX Booster With Diversity Switch for IoT / BLE / ZigBee

RFX2411N
Production Data Sheet
ABSOLUTE MAXIMUM RATINGS:
Parameters
DC VDD Voltage Supply
DC Control Pin Voltage
Units
Min
Max
V
0
4.5
V
0
3.6
Conditions
VDD Pins, Standby Mode
DC VDD Current Consumption
mA
350
Through VDD Pins when TX is “ON”
TX RF Input Power
LNA RF Input Power
Bypass RF Input Power
Junction Temperature
Storage Ambient Temperature
ESD HBM
ESD CDM
dBm
dBm
dBm
o_C
o_C
+/- V
+/- V
+5
+5
At active ANT port in RX LNA Mode
+16
At any RF port in Bypass mode
+150
No RF and DC Voltages Applied
-50
+150 Appropriate care required according to
JEDEC Standards
3750
All Pins
1000
All Pins
Note: Sustained operation at or above the Absolute Maximum Ratings for any one or
combinations of the above parameters may result in permanent damage to the device and
is not recommended.
All Maximum RF Input Power Ratings assume 50-Ohm terminal impedance.
RECOMENDED OPERATING CONDITIONS:
Parameters
Units Min
DC VDD Voltage Supply
V
2.0*
Control Voltage “High”
V
1.2
Control Voltage “Low”
V
0
Control Pin DC Current Consumption nA
DC Shutdown Current
nA
PA Turn On/Off Time
µsec
LNA Turn On/Off Time
µsec
Antenna Switch Time
Operating Ambient Temperature
µsec
o_C
-40
ja
o_C/W
Typ Max
Conditions
3.3
3.6
All VDD Pins
VDD
10K ohm series resistor
0.3
300
MODE, TXEN, RXEN, SWANT
300
MODE, TXEN, RXEN = Low
1
1
1
+125
35
See Note 1
Note 1: For operation above +85 ^oC, use the ja as guidance for system design to assure the junction
temperature will not exceed the maximum of +150 ^oC. A major contributor to ja is the PCB. The above ja
value is based on the RFaxis EVB with multiple vias under the paddle.
*At VDD < 3.3V the RFX2411N will provide a reduced maximum TX output power
3
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com