English
Language : 

PD22-73 Datasheet, PDF (3/4 Pages) Alpha Industries – Two-Way Power Splitter 2.1-2.3 GHz
Recommended Board Layout
0.018 Typ.
0.075
0.015 Typ.
0.039 Typ.
Material is 10 mil FR4.
0.020 Dia.
Via 3 Places
SOT-6
0.074
(1.90 mm) Ref.
Pin 6
Pin 1
Indicator
Pin 1
0.126 (3.20 mm)
0.087 (2.20 mm)
0.071 (1.80 mm)
0.052 (1.30 mm)
0.020 (0.51 mm)
0.014 (0.350 mm)
0.006
(0.15 mm)
0.000
(0.00 mm)
0.057 (1.45 mm)
0.035 (0.90 mm)
0.037 (0.95 mm) Ref.
5.0° ± 1°
0.012
(0.30 mm)
Typ.
5.0° ± 1°
0.014
(0.26 mm)
0.004
(0.10 mm)
0.122 (3.10 mm)
0.106 (2.70 mm)
0.022 (0.61 mm)
0.004 (0.10 mm)
DATA SHEET • PD22-73, PD22-73LF
Absolute Maximum Ratings
Characteristic
Input power(1)
Input power(2)
Value
1.5 W CW
0.75 W CW
Operating temperature
-40 °C to +85 °C
Storage temperature
-65 °C to +150 °C
1. When used as a power divider with a 2.0:1 maximum VSWR on all ports.
2. When used as a power combiner with a 2.0:1 maximum VSWR on all ports.
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200243 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
3