ATN3580 Datasheet, PDF (3/4 Pages) Skyworks Solutions Inc. – Fixed Attenuator Pads

Typical Performance Data
12.0
11.5
11.0
10.5
10.0
9.5
9.0
8.5
8.0
0
10
20
30
40
Frequency (GHz)
Figure 1. ATN3580-10
Attenuation vs. Frequency
Outline Drawings
518-060
COPLANAR
RESISTOR
PADS MUST
BE GROUNDED
0.0045 (0.114 mm)
0.0035 (0.089 mm)
2 PLACES
SEE NOTE 3
2 PLACES
INPUT/OUTPUT
0.030
(0.76 mm)
0.028
(0.71 mm)
0.0055 (0.140 mm)
0.0045 (0.114 mm)
2 PLACES
SILICON
0.0075 (0.190 mm)
0.0055 (0.140 mm)
SCHEMATIC ATT. PADS
IN
OUT
1. Cross hatching = gold contact areas.
2. Dimensions not specified in this drawing vary per attenuation value.
3. Indicates attenuation value.
4. This DIM. can be as highh 0.012 for high attenuation values.
5. Back surface is gold, grounding not required.
DATA SHEET • ATN3580 SERIES
50
40
S22 MAG.
30
S11 MAG.
20
10
0
0
10
20
30
40
Frequency (GHz)
Figure 2. ATN3580-10
Return Loss vs. Frequency
516-060
0.012 (0.30 mm)
0.010 (0.25 mm) TYP.
0.032 0.029
(0.81 mm) (0.74 mm)
0.0075 (0.191 mm)
0.0055 (0.140 mm)
INPUT/OUTPUT _{0.002 (0.05 mm)}
MIN. TYP.
0.006 (0.15 mm)
0.004 (0.10 mm)
TYP. SQ.
SEE NOTE 3
2 PLACES ^0.020
(0.51 mm)
0.026
(0.66 mm)
COPLANAR
RESISTOR,
PADS MUST
BE GROUNDED
SILICON
SCHEMATIC ATT. PADS
0.0075 (0.190 mm)
0.0055 (0.140 mm)
IN
OUT
1. Cross hatching = gold contact areas.
2. Dimensions not specified in this drawing vary per attenuation value.
3. Indicates attenuation value.
4. Back surface is gold, grounding not required.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200141 Rev.A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 7, 2005
3