ACA2461 Datasheet, PDF (3/10 Pages) Skyworks Solutions Inc. – 1218 MHz CATV CATV Push-Pull Driver Amplifier

ELECTRICAL CHARACTERISTICS
Table 2: Absolute Mimimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Supply (pins 12, 13)
0
+28
VDC
Current Adjust (pin 6)
0
+4
VDC
RF Power at Inputs (pins 4, 5)
-
+75 dBmV
Storage Temperature
-65 +150
°C
Soldering Temperature
-
+260
°C
Soldering Time
-
5.0
Sec
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure to
absolute ratings for extended periods of time may adversely affect reliability.
Notes:
(1) Pins 2, 4, 5 and 7 should be AC-coupled. No external DC bias should be
applied.
(2) Pin 6 should be AC-grounded and/or pulled to ground through a resistor for
current control.
(3) Pins 10, 11, 14 and 15 should have no other external bias applied.
ACA2461
PARAMETER
Table 3: Operating Ranges
MIN TYP
MAX
UNIT
RF Frequency
40
-
1200 MHz
Supply Voltage (VDD)
-
+24
-
VDC
Case Temperature
-40
-
+110
°C
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specifications.
Preliminary Data Sheet
3
204209B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 19, 2016