ACA2407E Datasheet, PDF (3/12 Pages) ANADIGICS, Inc – 750/870 MHz CATV Power Doubler Line Amplifier

ELECTRICAL CHARACTERISTICS
Table 2: Absolute Mimimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Supply (pins 12, 13)
0
+28 VDC
RF Power at Inputs (pins 4, 5)
-
+75 dBmV
Storage Temperature
-65 +150
°C
Soldering Temperature
-
+260
°C
Soldering Time
-
5.0
Sec
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure to
absolute ratings for extended periods of time may adversely affect reliability.
Notes:
(1) Pins 2, 4, 5 and 7 should be AC-coupled. No external DC bias should be
applied.
(2) Pin 6 should be AC-grounded and/or pulled to ground through a resistor for
current control.
(3) Pins 11 and 14 are bias feeds for input amplifiers 1A and 1B. No external
DC bias should be applied.
(4) Pins 10 and 15 receive DC bias directly from pins 11 and 14.
ACA2407E
Table 3: Operating Ranges
PARAMETER
MIN TYP MAX UNIT
Supply: VDD (pins 12, 13)
-
+24
-
VDC
Voltage at ISET (pin 6)
-
+3
-
VDC
RF Frequency
40
-
1000 MHz
Case Temperature
-40
-
+110
°C
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specifications.
Data Sheet
3
204205B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 19, 2016