ACA1212 Datasheet, PDF (3/9 Pages) Skyworks Solutions Inc. – ACA1212: 1.2 GHz CATV Line Amplifier MMIC

DATA SHEET • ACA1212: 1.2 GHz CATV LINE AMPLIFIER MMIC
Electrical and Mechanical Specifications
The absolute maximum ratings of the ACA1212 are provided in
Table 2. Recommended operating conditions are specified in
Table 3, and electrical specifications are provided in Table 4.
Table 2. ACA1212 Absolute Maximum Ratings¹
Parameter
Minimum
Maximum
Units
Amplifier supplies (pins 11 and 14)
0
+15
VDC
RF input power (pins 3 and 6)
-
+70
dBmV
Storage temperature
–6 5
+150
°C
Soldering temperature
-
+260
°C
Soldering time
-
5.0
sec
1 _{Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at}
or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
2 _{Pins 3 and 6 should be AC-coupled. No external DC bias should be applied.}
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 3. ACA1212 Recommended Operating Conditions¹
Parameter
Symbol
Min
Typ
RF frequency
f
50
Supply (pins 11 and 14)
VDD
+12
Operating temperature
TA
–40
1 _{Performance is guaranteed only under the conditions listed in this table.}
Table 4. ACA1212 Electrical Specifications¹
TA = +25 C, VDD = +12 VDC, Unless Otherwise Noted)
Parameter
Gain¹
Gain flatness¹
Cable equivalent slope¹
Noise figure¹
CTB^1,2
CSO^1,2
XMOD^1,2
Symbol
Test Condition
Min
G
1218 MHz
10.3
55.25 MHz to 1218 MHz
-0.5
NF
CTB
CSO
ACLR
Supply current
Return loss (input/output)¹
RL
55.25 MHz to 1218 MHz
18
Thermal resistance
θJC
1 _{Measured with a balun on input and output of the device. See Figure 3 for test setup.}
2 _{Device measured with 79 analog channels, +47 dBmV output power at 1000 MHz with a 3 dB tilt and QAM to 1000 MHz.}
Max
1218
+100
Units
MHz
VDC
°C
Typ
Max
Units
10.9
11.5
dB
± 0.3
dB
0.25
1.0
dB
4
4.5
dB
–72
–70
dBc
–70
–68
dBc
–67
dBc
395
445
mA
22
dB
6.0
°C/W
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
204202C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2017
3