ACA0862-B Datasheet, PDF (3/14 Pages) Skyworks Solutions Inc. – 1 GHz CATV Line Amplifier MMIC

ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
ACA0862 - B, D
Amplifier Supplies (pins 10, 11, 14, 15)
0
+15 VDC
RF Input Power (pins 3, 6)
-
+70 dBmV
Storage Temperature
-6 5 +150
°C
Soldering Temperature
-
+260
°C
Soldering Time
-
5.0
sec
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure to
absolute ratings for extended periods of time may adversely affect reliability.
Notes:
(1) Pins 3 and 6 should be AC-coupled. No external DC bias should be
applied.
(2) Pin 7 must be terminated through a resistor to either Vd or GND.
P/N
ACA0862B
ACA0862D
Resistor (Pin7)
4.32K(R1)
9.09K(R2)
Termination
GND
VD
Refer to figure 17 (Test Circuit) and Table 6, page 8.
PARAMETER
Table 3: Operating Ranges
MIN TYP
MAX
UNIT
RF Frequency
40
-
1000 MHz
Supply: VD (pins 10, 11, 14, 15)
-
+12
-
VDC
Operating Temperature: TA
-40
-
+110
°C
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specifications.
Data Sheet
3
204198B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016