SKY65008 Datasheet, PDF (2/11 Pages) Skyworks Solutions Inc. – 250 - 2700 MHz Linear, Low Current Power Amplifier Driver

PRELIMINARY DATA SHEET • SKY65008
Electrical and Mechanical Specifications
Signal pin assignments and functional pin descriptions for the
SKY65008 are provided in Table 1. The absolute maximum
ratings are provided in Table 2, and the recommended operating
conditions in Table 3. Electrical characteristics of the SKY65008
are provided in Table 4.
The typical performance of the SKY65008 at various operating
frequencies is illustrated in Figures 3 through 9. Package
dimensions for the 3-pin MCM are shown in Figure 13, and tape
and reel dimensions are shown in Figure 14.
Package and Handling Information
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
The SKY65008 can be used for lead or lead-free soldering. If the
part is attached in a reflow oven, the temperature ramp rate
should not exceed 5 °C per second. Maximum temperature
should not exceed 225 °C and the time spent at a temperature
that exceeds 210 °C should be limited to less than 10 seconds. If
the part is manually attached, precaution should be taken to
ensure that the part is not subjected to a temperature that
exceeds 300 °C for more than 10 seconds.
For details on both attachment techniques, precautions, and
handling procedures recommended by Skyworks, please refer to
Skyworks Application Note, PCB Design and SMT
Assembly/Rework Guidelines for MCM-L Packages, document
number 101752. Additional information on standard SMT reflow
profiles can also be found in the JEDEC Standard J-STD-020.
Production quantities of both package types for this product are
shipped in standard tape and reel formats. For packaging details,
refer to the Skyworks Application Note, Tape and Reel, document
number 101568.
Electrostatic Discharge (ESD) Sensitivity
The SKY65008 is a static-sensitive electronic device. Do not
operate or store near strong electrostatic fields. Take proper ESD
precautions.
Table 1. SKY65008 Signal Descriptions
Pin #
1
RF_IN
2
GND
3
RF_OUT
Name
RF input
Ground
RF output
Description
Table 2. SKY65008 Absolute Maximum Ratings
(TA = +25 °C, unless otherwise noted)
Parameter
Symbol
Min
Typical
Max
Units
Supply voltage
VCC
4
V
RF output power
POUT
23
dBm
Supply current
ICC
110
mA
Power dissipation
PD
400
mW
Operating case temperature
TC
–40
+85
°C
Storage temperature
TST
–55
+125
°C
Junction temperature
TJ
150
°C
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal values.
Table 3. SKY65008 Recommended Operating Conditions
Parameter
Symbol
Min
Typical
Max
Units
Supply voltage
VCC
3.0
3.3
3.6
V
Frequency range
F
250
2700
MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
2
April 21, 2005 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 200292A