SKY13586-678LF Datasheet, PDF (2/8 Pages) Skyworks Solutions Inc. – 2.4 to 2.5 GHz SP3T Switch

DATA SHEET • SKY13586-678LF: 2.4 TO 2.5 GHz SP3T SWITCH
Table 1. SKY13586-678LF Signal Descriptions
Pin
Name
Description
1
RFC
Antenna
2
V1
Switch logic control (see Table 4)
3
RF1
RF port 1
4
V2
Switch logic control (see Table 4)
1 _{Exposed GND pad must be grounded.}
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13586-678LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
Pin
Name
5
RF2
6
VDD
7
RF3
8
GND
Description
RF port 2
DC power supply
RF port 3
Ground
The state of the SKY13586-678LF is determined by the logic
provided in Table 4.
Table 2. SKY13586-678LF Absolute Maximum Ratings¹
Parameter
Symbol
Minimum
Typical
Maximum
Units
Input power
PIN
+32
dBm
Supply voltage
VDD
6.0
V
Control voltage
VCTL
3.7
V
Storage temperature
TSTG
–65
+150
C
Operating temperature
TOP
–40
+90
C
1 _{Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set}
at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
2
June 28, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203452D