SKY13270-92LF Datasheet, PDF (2/5 Pages) Skyworks Solutions Inc. – GaAs SPDT Switch 100 MHz-2.5 GHz

PRELIMINARY DATA SHEET • SKY13270-92LF
Electrical Specifications
V_CTL = 0 V/3 V, T = 25 °C, P_INPUT = 0 dBm, Z₀ = 50 Ω, unless otherwise noted
Parameter
Frequency
Insertion loss
0.1–0.5 GHz
0.5–1.0 GHz
1.0–2.0 GHz
2.0–2.5 GHz
Isolation
0.1–0.5 GHz
0.5–1.0 GHz
1.0–2.0 GHz
2.0–2.5 GHz
VSWR
0.1–1.0 GHz
1.0–2.5 GHz
Min.
Typ.
Max.
Unit
0.30
0.4
dB
0.35
0.5
dB
0.45
0.6
dB
0.55
0.7
dB
28
30
dB
22
24
dB
17
19
dB
15
17
dB
1.2:1
1.3:1
Operating Characteristics
V_CTL = 0 V/3 V, T = 25 °C, P_INPUT = 0 dBm, Z₀ = 50 Ω, unless otherwise noted
Parameter
Condition
Frequency
Switching characteristics
Rise, fall
On, off
Video feedthru
Input power for -0.1 dB compression
0/90% or 90/10% RF
50% CTL to 90/10% RF
T_RISE = 1 ns, BW = 500 MHz
900 MHz
Second, third harmonics
P_IN = 34.5 dBm, f_IN = 900 MHz
Thermal resistance
Control voltages
V_LOW = 0 @ 20 µA max.
V_HIGH = 2.5 V @ 100 µA max. to 5 V @ 200 µA max.
Min.
Typ.
Max.
Unit
60
ns
100
ns
50
mV
37
dBm
-65
dBc
25
°C/W
Absolute Maximum Ratings
Characteristic
Value
Control voltage range
RF input power @ 0/5 V
-0.2 ≤ V_C ≤ 8 V
6 W, f > 900 MHz
Operating temperature
-40 °C to +85 °C
Storage temperature
-65 °C to +150 °C
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Truth Table
V₁
V₂
V_LOW
V_HIGH
V_HIGH
V_LOW
2.5 V ≤ V_HIGH ≤ 5 V, 0 ≤ V_LOW ≤ 0.2 V.
All other conditions not recommended.
J₁–J₂
Isolation
Insertion loss
J₁–J₃
Insertion loss
Isolation
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
2
August 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200128 Rev. C