SKY13267-321 Datasheet, PDF (2/6 Pages) Skyworks Solutions Inc. – GaAs T/R Diversity Switch LF-6 GHz

DATA SHEET • SKY13267-321
Electrical Specifications
V_CTL = 0 V/3V, T = 25 °C, P_INPUT = 0 dBm, Z_O = 50 Ω, unless otherwise noted
Parameter
Condition
Frequency
Insertion loss
ANT1, ANT2 to Tx, Rx ports
2.400–2.500 GHz
5.150–5.350 GHz
5.725–5.825 GHz
Isolation
ANT1, ANT2 to Tx, Rx ports
2.400–2.500 GHz
5.150–5.350 GHz
5.725–5.825 GHz
ANT1 to ANT2, Tx to Rx ports
2.400–2.500 GHz
5.150–5.350 GHz
5.725–5.825 GHz
Return loss
ANT1, ANT2 to Tx, Rx ports
2.400–2.500 GHz
5.150–5.350 GHz
5.725–5.825 GHz
Min.
Typ.
Max.
Unit
0.7
1.0
dB
0.8
1.1
dB
0.9
1.2
dB
30
32
dB
23
25
dB
21
23
dB
23
dB
20
dB
20
dB
22
dB
19
dB
17
dB
Operating Characteristics
V_CTL = 0 V/3V, T = 25 °C, P_INPUT = 0 dBm, Z_O = 50 Ω, unless otherwise noted
Parameter
Condition
Frequency
Switching characteristics
Rise, fall
On, off
Video feedthru
Error vector magnitude
Input third order intermodulation intercept
Thermal resistance
10/90% or 90/10% RF
50% V_CTL to 90/10% RF
T_RISE = 1 ns, BW = 500 MHz
802.11a, OFDM, 64 QAM, 54 MBPS,
P_IN ≤ 27 dBm
For two input tones. 15 dBm each tone,
5 MHz spacing, V_HIGH = 3 V
5.8 GHz
2.4 GHz
5.2 GHz
Control voltage
V_LOW = 0 V @ 10 µA max.
V_HIGH = 3 V to 5 V @ 15 µA max.
Min.
Typ.
Max.
Unit
20
ns
40
ns
50
mV
≤1
%
49
dBm
44
dBm
25
°C/W
Absolute Maximum Ratings
Characteristic
Value
Control voltage range
RF input power @ 0/3V
RF input power @ 0/5V
-0.2 ≤ V_C ≤ 8 V
32 dBm
34 dBm
Storage temperature range
-65 °C to +150 °C
Operating temperature range
-40 °C to +85 °C
Electrostatic discharge (ESD) -
Human Body Model (HBM)
Class 0
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
2
April 25, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200027 Rev. E