RI23110 Datasheet, PDF (18/22 Pages) Skyworks Solutions Inc. – CDMA PCS 3-4 Volt Power Amplifier (1720-1910 MHz)

Package Dimensions and Pin Description
United States PCS Band (1850–1910 MHz)
Figure 22. Typical Case Markings
RI23110
CDMA PCS 3–4 Volt Power Amplifier (1720–1910 MHz)
Mark Pin 1
Identifier
SKYWORKS
RI23110-11
NXXXXX.XX
YYWW TWH
Manufacturing
Part Number-Revision
Lot Number
YY = Manufacture Year
WW = Week Package
Sealed
TWH = Country Code
100728_008
Because of its sensitivity to moisture absorption, this device package is baked and vacuum packed
prior to shipment. Instructions on the shipping container label must be followed regarding exposure
to moisture after the container seal is broken, otherwise, problems related to moisture absorption
may occur when the part is subjected to high temperature during solder assembly.
The RI23110 is capable of withstanding an MSL 3/225 °C solder reflow. Care must be taken when
attaching this product, whether it is done manually or in a production solder reflow environment. If
the part is attached in a reflow oven, the temperature ramp rate should not exceed 5 °C per second;
maximum temperature should not exceed 225 °C. If the part is manually attached, precaution
should be taken to insure that the part is not subjected to temperatures exceeding 225 °C for more
than 10 seconds. For details on both attachment techniques, precautions, and handling procedures
recommended by Conexant, please refer to Application Note: PCB Design and SMT
Assembly/Rework, Document Number 101752. Additional information on standard SMT reflow profiles
can also be found in the JEDEC Standard J–STD–020A.
Production quantities of this product are shipped in the standard tape-and-reel format as shown in
Figure 23.
18
Skyworks
100728C