SKY67151-396LF Datasheet, PDF (15/24 Pages) Skyworks Solutions Inc. – 0.7-3.8 GHz Ultra Low-Noise Amplifier

DATA SHEET • SKY67151-396LF ULTRA LOW-NOISE AMPLIFIER
Evaluation Board Description
The SKY67151-396LF Evaluation Board is used to test the
performance of the SKY67151-396LF LNA. Four different boards
are available for different frequency operations: 700 to 1000 MHz,
1600 to 2200 MHz, 2300 to 2700 MHz, and 3400 to 3800 MHz.
An assembly drawing for the Evaluation Board is shown in
Figure 22. The layer detail is provided in Figure 23. An Evaluation
Board schematic diagram is provided in Figure 24 (500 to
3800 MHz). Tables 9 through 12 provide the Bill of Materials
(BOM) list for the four different Evaluation Board tuning
frequencies.
Package Dimensions
The PCB layout footprint for the SKY67151-396LF is provided in
Figure 25. Typical case markings are shown in Figure 26.
Package dimensions for the 8-pin DFN are shown in Figure 27,
and tape and reel dimensions are provided in Figure 28.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY67151-396LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202390C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 25, 2013
15