SKY13550-667LF Datasheet, PDF (15/16 Pages) Skyworks Solutions Inc. – 0.4 to 3.8 GHz DP8T (SP4T/SP4T) Main/Receive Diversity Switch with MIPI RFFE Interface for Carrier Aggregation

DATA SHEET • SKY13550-667LF: DP8T RECEIVE MAIN/DIVERSITY SWITCH FOR CARRIER AGGREGATION
Pin 1
Indicator
C
1.60
AB
–0.004 0.046
5X R0.050
10X 0.600
4X 0.200
0.400 Pitch
Pin 14
Pin 1
Pin 1 Indicator
0.201 X 45°
2X 0.05 C
2X 0.05 C
Top View
2.00
0.55 ±0.05
0.05 C
0.110 Ref
0.05 C 3
14X
Side View
4X 0.400
8X 0.800
0.6 ±0.1
Exposed Pad
See Detail A
14X 0.100
0.5 ±0.1
Bottom View
Notes:
1. Dimensions and tolerances according to ASME Y14.5M-1994.
2. Unless otherwise specified, all measurements are in millimeters.
3. Coplanarity applies to the terminals and all other bottom surface metallization.
4. Plating requirement per source control drawing (SCD) 2504.
5. Dimension applies to metallized terminal. If the terminal has a radius on its end,
the width dimension should not be measured in that radius area.
Tolerances on decimals:
.x = ± 0.1
.xx = ± 0.05
.xxx = ±0.025
Tolerances on angles:
± 0.5°
4X R0.020
0.2 ±0.05
0.2 ±0.05
Detail A
0.10 M C A B 5
Scale 100X
3X This Rotation
3X Rotated 180°
4X Rotated 90° CW
4X Rotated 90° CCW
Figure 11. SKY13550-667LF Package Dimensions
203284D-011
0.25 ±0.02
Ø_{1.5–0 0+.000.10}
2.00 ±0.05
4.00 ±0.10
B
Pin 1
5°
Max
0.85 ±0.05 (Ko)
4.00 ±0.10
A
BA
Ø_{0.60 ±0.05}
Section B
Notes:
1. Carrier tape material: black conductive polystyrene or polycarbonate.
2. Cover tape material: transparent conductive.
3. ESD surface resistivity shall be ≤1 x 10¹⁰ Ohms/square per EIA, JEDEC TNR specification.
4. 10-sprocket hole pitch cumulative tolerance: ±0.20 mm.
5. Ao and Bo measured on plane 0.30 mm above the bottom of the pocket.
6. All dimensions are in millimeters.
5° _Max
1.85 ±0.05 (Ao)
Section A
Figure 12. SKY13550-667LF Tape and Reel Dimensions
203284D-012
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
203284E • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 20, 2016
15