SKY13713-21 Datasheet, PDF (11/12 Pages) Skyworks Solutions Inc. – RX Diversity FEM with Gain (B29, B26, B8, B20, B12/13, B28A and B28B)

DATA SHEET • SKY13713-21: RX DIVERSITY FEM
4
B
C
Top
3
Pin 1
Indicator
0.075 A B C
0.65 ± 0.05
A
0.1
Top View
Side View
24X SMT Pad
0.1 M A B C
4X 0.25
4X 0.75
16X 1.4
B
Solder Mask Opening
0.2 A B C
See Detail C
A
0
Pin 24
Pin 1 Indicator
Pin 1
Bottom View
0.35 ± 0.1
0.4 ± 0.05
(0.1)
0.3 ± 0.05
0.3 ± 0.1
(0.1)
0.3 ± 0.1
(0.1)
2.4
5X R0.05 Max
1.4
Metal Pad
Edge
Detail A
SMT Pad
Scale: 2X
4X This Rotation
4X Rotated 180º
6X Rotated 90º CW
6X Rotated 90º CCW
Metal Pad
Edge
Detail B
SMT Pad
Scale: 2X
1X This Rotation
1X Rotated 180º
1X Rotated 90º CW
1X Rotated 90º CCW
Solder Mask Edges
Detail C
Center Pad
Scale: Full
1X This Rotation
Notes:
1. Dimensions and tolerances according to ASME Y14.5M-1994.
2. Dimensions are in millimeters.
Figure 7. SKY13713-21 Package Dimensions
0.3 X 0.3
203510-007
0.30 ±0.05
–0.10.050 _+0.10
B
2.00 ±0.05
4.00 ±0.10
A
A
0.90 ±0.05
Section B
Notes:
B
8.00 ±0.10
Pin 1
Ø 1.00 ±0.10
3.24 ±0.05
1. 10-sprocket hole pitch cumulative tolerance: ±0.2 mm.
2. Camber not to exceed 1 mm in 250 mm.
3. Carrier tape: black conductive polystyrene.
4. Ao and Bo measured on a plane 0.3 mm from bottom of pocket.
5. Ko measured from a plane on the inside bottom of the
pocket to the top surface of the carrier.
6. Pocket position relative to sprocket hole measured as true position
of pocket, not pocket hole.
7. Pocket center and pocket hole center must be the same position.
8. All dimensions are in millimeters.
Section A
Figure 8. SKY13713-21 Tape and Reel Dimensions
203510-008
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
203510B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 10, 2016
11