SKY67023-396LF Datasheet, PDF (10/16 Pages) Skyworks Solutions Inc. – 2.0 to 3.0 GHz High Linearity, Active Bias Low-Noise Amplifier

DATA SHEET • SKY67023-396LF: HIGH LINEARITY, ACTIVE BIAS LNA
Table 4. Noise Parameters vs Frequency @ 25 °C (3 of 3)
Frequency
(GHz)
Minimum Noise
Figure (FMIN)
(dB)
Noise Resistance
(RN)
(Ω)
3.00
0.981
0.048
3.05
0.997
0.050
3.10
1.014
0.051
3.15
1.030
0.053
3.20
1.046
0.055
3.25
1.062
0.057
3.30
1.077
0.059
3.35
1.092
0.061
3.40
1.106
0.063
3.45
1.120
0.065
3.50
1.134
0.067
3.55
1.147
0.069
3.60
1.160
0.071
3.65
1.172
0.074
3.70
1.183
0.076
3.75
1.194
0.078
3.80
1.204
0.081
3.85
1.214
0.083
3.90
1.223
0.086
3.95
1.231
0.088
4.00
1.239
0.091
Γopt
Magnitude
0.560
0.563
0.565
0.568
0.570
0.572
0.573
0.574
0.575
0.576
0.576
0.576
0.576
0.575
0.574
0.573
0.571
0.569
0.566
0.564
0.560
Phase
–168.506
–167.917
–167.373
–166.873
–166.414
–165.998
–165.621
–165.283
–164.983
–164.719
–164.492
–164.298
–164.138
–164.009
–163.912
–163.845
–163.806
–163.794
–163.809
–163.849
–163.913
Associated Gain
(dB)
17.886
17.787
17.688
17.587
17.485
17.382
17.277
17.169
17.059
16.947
16.831
16.712
16.589
16.463
16.332
16.197
16.057
15.912
15.762
15.606
15.444
Maximum Gain
(GMAX)
(dB)
18.177
18.083
17.988
17.891
17.791
17.688
17.582
17.471
17.357
17.237
17.112
16.982
16.846
16.703
16.553
16.396
16.232
16.059
15.877
15.687
15.487
Evaluation Board Description
The SKY67023-396LF Evaluation Board is used to test the
performance of the SKY67023-396LF LNA. An assembly drawing
for the Evaluation Board is shown in Figure 26. The layer detail is
provided in Figure 27. An Evaluation Board schematic diagram is
provided in Figure 28. Table 5 provides the Bill of Materials (BOM)
list for Evaluation Board components.
Package Dimensions
The PCB layout footprint for the SKY67023-396LF is provided in
Figure 29. Typical part markings are shown in Figure 30. Package
dimensions are shown in Figure 31, and tape and reel dimensions
are provided in Figure 32.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY67023-396LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
10
November 2, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202678B