SMS3926-099 Datasheet, PDF (1/5 Pages) Skyworks Solutions Inc. – Schottky Diode Quad Mixer Chips Supplied on Film Frame

DATA SHEET
Schottky Diode Quad Mixer
Chips Supplied on Film Frame
Features
● _{Designed for high-performance, double-balanced mixers}
● _{Three barrier heights available}
● _{Schottky diodes supplied 100% tested, sawn, mounted on}
film frame
● _{Low cost}
● _{Available lead (Pb)-free, RoHS-compliant, and Green}
Description
The Skyworks SMS392x-099 family of Si Schottky diodes are
configured as ring quads intended for use in double-balanced
mixers. Each ring quad die is comprised of four Schottky junc-
tions, connected anode to cathode. There are three barrier
heights available: SMS3926 is composed of low-barrier diodes,
which can be driven with low-power local oscillator signals;
SMS3927 is composed of medium-barrier diodes, for applications
in which moderate-power local oscillator signals are available;
and, SMS3928 is composed of high-barrier diodes for applications
that require very low distortion performance and have higher local
oscillator power available. These ring quads are 100% tested,
sawn and supplied on film frame in wafer quantities.
NEW Skyworks Green products are lead (Pb)-free, RoHS
(Restriction of Hazardous Substances)-compliant,
conform to the EIA/EICTA/JEITA Joint Industry Guide
(JIG) Level A guidelines, and are free from antimony
trioxide and brominated flame retardants.
2
2
1
3
1
3
4
4
Absolute Maximum Ratings
Characteristic
Value
Forward current (I_F)
Power dissipation @ 25 °C
at the base of the chip
75 mA
75 mW
per junction
Storage temperature
-65 °C to +200 °C
Operating temperature
-65 °C to +150 °C
ESD human body model
Class 0
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200165 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
1