SMS1546 Datasheet, PDF (1/5 Pages) Alpha Industries – Surface Mount Mixer and Detector Schottky Diodes

DATA SHEET
Surface Mount Mixer and
Detector Schottky Diodes
Features
● _{Designed for high-volume commercial applications}
● _{Available lead (Pb)-free MSL-1 @ 250 °C per JEDEC J-STD-020}
● _{Tight parameter distribution}
● _{Available as singles and pairs}
● _{Available in tape and reel packaging}
Description
These low cost, surface mountable plastic packaged silicon mixer
Schottky diodes are designed for RF and microwave mixers and
detectors. They include low barrier diodes and zero bias detec-
tors, combining Skyworks advanced semiconductor technology
with low cost packaging techniques. All diodes are 100% DC
tested and deliver tight parameter distribution, minimizing perfor-
mance variability. They are available in SC-70, SC-79, SOD-323,
SOT-23, SOT-143, and LGA packages. Wiring configurations
include singles, common cathode, series pairs and unconnected
pairs. Applications include low noise receivers used in high sensi-
tivity ID tags, wireless systems, radio designs and may be used
at frequencies to 10 GHz. SPICE model parameters are included
as a design tool.
NEW Skyworks offers lead (Pb)-free “environmentally
friendly” packaging that is RoHS compliant
(European Parliament for the Restriction of
Hazardous Substances).
Absolute Maximum Ratings
Characteristic
Value
Reverse voltage (V_R)
Rated V_B
Forward current - steady state (I_F)
50 mA
Power dissipation (P_D)
75 mW
Storage temperature (T_ST)
-65 °C to +150 °C
Operating temperature (T_OP)
-65 °C to +150 °C
Junction temperature (T_J)
150 °C
Soldering temperature
260 °C for 5 seconds
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200041 Rev. C • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • February 15, 2005
1