SMP1322 Datasheet, PDF (1/6 Pages) Alpha Industries – Low Resistance Plastic Packaged PIN Diodes

DATA SHEET
SMP1322 Series: Low Resistance,
Plastic Packaged PIN Diodes
Features
● _{Designed for high-performance wireless switch applications}
● _{RS @ 1 mA 0.8 Ω typical}
● _{Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C}
per JEDEC J-STD-020
● _{Available in tape and reel packaging}
Description
The SMP1322 series of plastic packaged, surface mountable
PIN diodes are designed for high-volume switch applications
from 10 MHz to beyond 2 GHz. The ultralow resistance of these
diodes (1.5 Ω maximum at 1 mA and 0.5 Ω typical at 10 mA)
makes the SMP1322 series suited to low-loss PIN diode switches
in battery operated circuits. Available in a selection of plastic
packages and in a variety of configurations including an
ultralow inductance (0.2 nH) SOT-143 (SMP1322-017), the
small footprint SC-79 and the miniature SC-70. In addition,
the SMP1322-016 consists of two diodes in a SOT-143 package
configured to enable insertion in a quarter-wave T/R switch with
no crossover connections.
NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
Absolute Maximum Ratings
Characteristic
Value
Reverse voltage (V_R)
50 V
Power dissipation @ 25 °C lead
temperature (P_D)
250 mW
Storage temperature (T_ST)
-65 °C to +150 °C
Operating temperature (T_OP)
-65 °C to +150 °C
ESD human body model
Class 1B
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200049 Rev. F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 23, 2006
1