|
SMP1304_15 Datasheet, PDF (1/8 Pages) Skyworks Solutions Inc. – Low-Distortion Attenuator Plastic Packaged PIN Diodes | |||
|
DATA SHEET
SMP1304 Series: Low-Distortion Attenuator Plastic Packaged
PIN Diodes
Applications
ï· TV distribution
ï· Attenuator circuits
Features
ï· Low-distortion design
ï· Frequency range from 5 MHz to >2 GHz
ï· Designed for base station applications
ï· Configured for PI and TEE attenuators
ï· Packages rated MSL1 @ 260 ï°C per JEDEC J-STD-020
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Deï¬nition of GreenTM, document number
SQ04â0074.
Description
The SMP1304 series of plastic packaged, surface mountable, low
capacitance (0.3 pF) silicon PIN diodes is designed for attenuator
applications from 5 MHz to beyond 2 GHz.
The thick 100 μm I region of these PIN diodes makes them very
attractive for use in low-distortion PI and TEE attenuators
commonly found in TV distribution applications.
The 1 μs typical carrier lifetime of these diodes results in a
resistance of 20 Ω maximum at 1 mA and 7 Ω maximum at
10 mA.
The SMP1304 series is available in a selection of plastic
packages: as a single diode in small footprint and SC-79
packages, and in a variety of configurations in an SOT-23
package.
The SMP1304-027 is available in an SOT-5 package as a
four-diode array designed for insertion in commonly used four-
diode PI attenuator circuits.
Table 1 describes the various packages and marking of the
SMP1304 series.
Skyworks Solutions, Inc. ⢠Phone [781] 376-3000 ⢠Fax [781] 376-3100 ⢠sales@skyworksinc.com ⢠www.skyworksinc.com
200044P ⢠Skyworks Proprietary Information ⢠Products and Product Information are Subject to Change Without Notice ⢠August 6, 2015
1
|
▷ |