English
Language : 

SKY82896 Datasheet, PDF (1/3 Pages) Skyworks Solutions Inc. – Three-Channel-Two-Channel Boost LED Driver
PRODUCT SUMMARY
SKY82896/97: Three-Channel/Two-Channel Boost LED Driver
with I2C Interface
Applications
 Smartphones
 Tablets
 Portable media players
Features
 Input voltage range: 2.5 V to 5.5 V
 Three channels with up to 9 LEDs in series (up to 27 LEDs)
 30 mA max LED current
 ±2% current accuracy and 2% matching
 Backlight power reduction:
 Output efficiency up to 90%
 Shutdown current: < 1 A
 Ultra-high resolution dimming:
 10-bit dimming I2C /analog-PWM/direct-PWM
 100 Hz to 25 KHz APWM capability
 100 Hz to 50 kHz DPWM capability
 Comprehensive system protection:
 Integrated and programmable over-voltage protection
 Open/short LED protection, over-temperature and
boost over-current protection
 Display system optimization:
 Programmable fade-in/fade-out
 Adjustable compensation to optimize image quality
 PWM options do not require I2C control
 Separate inputs for APWM and DPWM dimming mixing for up
to 20-bit dimming resolution
 Adjustable current limit for smallest inductor
 Ultra-small, low-profile WLCSP (16-bump, 1.956 mm 
1.906 mm) package (MSL1, 260 ºC per JEDEC J-STD-020)
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of GreenTM, document number
SQ04–0074.
Description
The SKY82896 is a step-up, three-channel LED driver with an
input voltage range of 2.5 V to 5.5 V. The SKY82897 is a
two-channel version of the SKY82896. The wide input voltage and
high-boost switching frequency allow for a small solution size.
Advanced dimming features and minimal external components
make this device suitable for LED backlight solutions in single-cell,
Li-Ion battery-based applications.
An integrated boost converter provides a high-voltage output for
driving up to 30 V. Three precision current sinks are
programmable up to 30 mA per string. The 900 kHz switching
frequency supports ultra-small, low-profile external components.
The SKY82896/97 supports three different types of dimming:
 Direct Pulse Width Modulation (DPWM) dimming receives the
input PWM control signal from the PWM pin and generates
the PWM output. Frequency and the ON duty are controlled
by the input control signal.
 Analog Pulse Width Modulation (APWM) dimming receives the
input PWM control signal from the PWM pin and converts the
ON duty of the input signal to an LED current control signal.
 I2C dimming adjusts the LED current through the I2C interface.
The APWM dimming input frequency ranges from 100 Hz to
25 kHz, and the DPMW dimming input frequency ranges from
100 Hz to 50 kHz. The minimum output ON duty in DPWM
dimming is limited by the minimum on-time (39 ns), which allows
10-bit resolution at 25 kHz DPWM frequency.
The device includes over-temperature protection, programmable
over-voltage protection, boost over-current protection, and
open/short LED protection.
The SKY82896/97 is available in a space-saving
1.956 mm  1.906 mm, 16-bump Wafer-Level Chip Scale
(WLCSP) package.
A typical application circuit is shown in Figure 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203461A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 10, 2015
1