SKY78114-61 Datasheet, PDF (1/2 Pages) Skyworks Solutions Inc. – SkyOne Ultra 2.5 Front-End Module for WCDMA / LTE Bands 1, 2, 3, 4, 25, 34, 39

PRODUCT SUMMARY
SKY78114-61 SkyOne® Ultra 2.5 Front-End Module for
WCDMA / LTE Bands 1, 2, 3, 4, 25, 34, 39
Applications
• Multiband 3G handsets
• CDMA /TD-SCDMA/ WCDMA / HSPA / HSPA+ / TDD-LTE /
FDD LTE-modulated handsets for bands 1, 2, 3, 4, 25, 34, 39
and BC1
Features
• Fully integrated MB multiband module
• Optimized for average power tracking system
• CDMA compatible
• Fully programmable Mobile Industry Processor Interface digital
control
• Integrated duplexers for bands 1, 2, 3
• MIPI/RFFE interface
• Closed loop architecture with the Implemented coupler
input/output port
• Integrated DP6T switches to support MB/HB carrier aggregation
for single antenna architecture
• External Tx Input switch control
• Support B25, B34/B39 Transmit Output port
• Small, low profile package
- 7 mm x 4.7 mm x 0.8 mm
- 44-pad configuration
• Intra-band Contiguous Up Link Carrier Aggregation (CA) Support
for B1, B2, B3, and B39 up to 35 MHz, 175RB
Description
The SKY78114-61 SkyOne® Ultra 2.5 is a multimode multiband
(MMMB) Front-End Module (FEM) that supports 3G/4G, and CDMA
handsets and operates efficiently in CDMA, TD-SCDMA, WCDMA,
HSPA, and LTE modes. The FEM consists of a WCDMA blocks
operating in the middle bands, a logic control block for multiple
power control levels, and band enable functions in both cellular
and UMTS. RF I/O ports internally matched to 50 ohms, minimize
the need for external components. Extremely low leakage current
maximizes handset standby time. The InGaP/GaAs die and
passive components are mounted on a multi-layer laminate
substrate and the assembly encapsulated in plastic overmold.
WCDMA: The SKY78114-61 enhanced architecture supports
WCDMA/High Speed Downlink Packet Access (HSDPA) and High
Speed Uplink Packet Access (HSUPA) modulations, covers
multiple bands for 3GPP including bands 1, 2, 3, and 4, and
operates at different power modes. The module is fully
controllable via a MIPI^® serial interface.
LTE: The SKY78114-61 meets spectral linearity requirements of
LTE modulation with QPSK/16QAM up to 40 MHz bandwidth,
including various resource block allocations, with good power-
added efficiency.
CDMA: The SKY78114-61 meets spectral linearity requirements
of CDMA2000 and EVDO Release A modulation with good power-
added efficiency.
TD-SCDMA: The SKY78114-61 meets spectral linearity
requirements of TD-SCDMA modulation dedicated transmit output
port.
Receiver Section: The SKY78114-61 includes integrated
Duplexers and a SP10T switch which supports simultaneous
Downlink Carrier Aggregation for additional Rx data rate and
provides 3G/4G Rx paths from antenna to LNA port of RFIC.
Carrier Aggregation (CA) requirements for noise and harmonics
are designed-in for best desense performance. Additionally, GPS
and LB/HB WiFi coexistence are designed-in for exceptional
support to maintain all radio performance including user
scenarios of simultaneous use. Optimized low insertion-loss Rx
paths, matching circuits and well-grounded guard traces (high
Tx–Rx isolation) inside the module mitigate desense problems
and enhance sensitivity performance.
Tx and Rx Ports: The SKY78114-61 provides two TRx ports.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
204491A • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • February 3, 2017
1