|
SKY77652-11 Datasheet, PDF (1/2 Pages) Skyworks Solutions Inc. – Multimode Multiband Power Amplifier Module | |||
|
PRODUCT SUMMARY
SKY77652-11 SkyLiTE⢠Multimode Multiband Power
Amplifier Module
Applications
⢠Multiband 3G / LTE handsets
⢠LTE Carrier Aggregation
⢠WCDMA Bands I, II, III, IV, IX
⢠CDMA Bands BC1, BC4, BC6, BC15
⢠TD-SCDMA Bands 34, 39
⢠FDD LTE Bands 1, 2, 3, 4, 7, 9, 25, 30
⢠TDD LTE Band 38, 39, 40, 41
Features
⢠Paired with SKY77651 (Low Band)
⢠Five output ports and One Rx port for Mid-band
⢠Four output ports and Two Rx ports for High Band
⢠Industry-leading PAE for 3G/4G
⢠Optimized for APT DCDC operation
⢠Fully programmable Mobile Industry Processor Interface (MIPI®)
control
⢠MIPI® programmable bias modes optimize best efficiency /
linearity trade-off for 3G and 4G; minimizes DG09 for 3G.
⢠Small, low profile package:
- 3.65 x 4.0 x 0.75 mm
- 28-pad configuration
Description
Skyworks SKY77652-11 SkyLiTE⢠is a multimode multiband
(MMMB) Power Amplifier Module (PAM) that supports 3G / 4G
handsets and operates efficiently in CDMA, WCDMA, TD-SCDMA,
and LTE modes. The module is fully programmable through a
Mobile Industry Processor Interface (MIPI®).
The PAM consists of a WCDMA / LTE block for high and mid-
bands, and a Multi-Function Control (MFC) block, RF input/output
ports internally matched to 50 ⦠to reduce the number of external
components. A CMOS integrated circuit uses standard MIPI®
controls to provide the internal MFC interface and operation.
Extremely low leakage current maximizes handset standby time.
The InGaP die and the silicon die and passive components are
mounted on a multi-layer laminate substrate. The assembly is
encapsulated in a 3.65 x 4.0 x 0.75 mm, 28-pad MCM, SMT
package which allows for a highly manufacturable, low cost
solution.
3G: The SKY77652-11 supports modulations in CDMA, WCDMA,
High-Speed Downlink Packet Access (HSDPA), High Speed Uplink
Packet Access (HSUPA), High Speed Packet Access (HSPA+), and
TD-SCDMA. Varying the input power level controls the output
power. A DCDC converter adjusts VCC to maximize efficiency for
each power level and modulation type.
4G: The SKY77652-11 supports 1.4, 3, 5, 10, 15, 20 MHz
channel bandwidths. Similar to 3G operation, varying the input
power level controls the output power and a DCDC converter
adjusts VCC to maximize efficiency for each power level.
3G / 4G Modulation scheme includes:
⢠WCDMA Voice Release 99
⢠HSDPA categories
⢠HSUPA
⢠HSPA+
⢠TD-SCDMA
⢠CDMA2000 1x RC1, 1x RC2
⢠CDMA2000 EVDO
⢠LTE 1.4, 3, 5, 10, 15, 20 MHz Channel BW
⢠TDD LTE
⢠TDD LTE intra-band uplink Carrier Aggregation (CA)
Band 39 (35 MHz), Band 40/41 (40 MHz)
Skyworks Solutions, Inc. ⢠Phone [781] 376â3000 ⢠Fax [781] 376â3100 ⢠sales@skyworksinc.com ⢠www.skyworksinc.com
203847A ⢠Skyworks Proprietary Information ⢠Products and Product Information are Subject to Change Without Notice ⢠February 4, 2016
1
|
▷ |