SKY19244-686LF Datasheet, PDF (1/2 Pages) Skyworks Solutions Inc. – 0.1 to 2.7 GHz SP3T High-Power Antenna Tuning Switch in a QFN Package

PRODUCT SUMMARY
SKY19244-686LF: 0.1 to 2.7 GHz SP3T High-Power Antenna
Tuning Switch in a QFN Package
Applications
 Antenna tuning
 Impedance tuning
 Band switching
Features
 Broadband frequency range: 0.1 to 2.7 GHz
 Low ON-state resistance and OFF-state capacitance
 High-power and peak-voltage handling (+42 dBm/39 V typical)
 No external DC blocking capacitors required
 Small QFN (10-pin, 1.5  1.1  0.5 mm maximum) package
(MSL1, 260 C per JEDEC J-STD-020)
RF1
RF2
RFC
RF3
Logic and Supply
Skyworks Green^TM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green^TM, document number
SQ04–0074.
Figure 1. SKY19244-686LF Block Diagram
Description
The SKY19244-686LF is a Quad Flat No-Lead (QFN) single-pole,
triple-throw (SP3T) switch designed for antenna tuning
applications that require very low RON and COFF. Switching is
controlled by an integrated GPIO interface with three control pins.
Depending on the logic voltage level applied to the control pins,
the antenna port can be either connected to one of the three
switched RF outputs or to multiple pre-defined outputs
simultaneously, while the other RF ports are in isolation state to
antenna port.
No external DC blocking capacitors are required as long as no DC
voltage is applied on any RF path.
The SKY19244-686LF is provided in a compact 10-pin,
1.5  1.1  0.5 mm maximum QFN that meets requirements for
board-level assembly.
A functional block diagram is shown in Figure 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
204012A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 3, 2016
1