SKY19237-001 Datasheet, PDF (1/2 Pages) Skyworks Solutions Inc. – 0.7 to 2.7 GHz Triple SPST (3xSPST) Shunt MIPI Switch in a WLCSP Package

PRODUCT SUMMARY
SKY19237-001: 0.7 to 2.7 GHz Triple SPST (3xSPST) Shunt
MIPI Switch in a WLCSP Package
Applications
 Antenna tuning
 Impedance tuning
 Band switching
Features
 Broadband frequency range: 0.7 to 2.7 GHz
 Two RF shunts to ground:
 Low RON: 2 
 Low COFF: 200 fF
 RF voltage handling in the OFF state: 80 V peak
 High linearity for carrier aggregation applications
 Supply voltage: 2.4 to 4.8 V
 Ultra-small WLCSP (11-bump, 1.685 × 1.775 × 0.5 mm,
262 m diameter, 400 m pitch) package
(MSL1, 260 °C per JEDEC J-STD-020)
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
RF1 _{RF2 RF3}
VDD
VIO
Bias
and
CLK
Logic
DATA
USID
GND
203878A-001
Figure 1. SKY19237-001 Block Diagram
Description
The SKY19237-001 is a wafer level chip scale package (WLCSP)
triple-shunt, single-pole, single-throw (3xSPST) switch with
integrated logic and bias block. Both paths are connected on one
side to a single RF ground bump.
The part is designed to sustain a peak voltage of 80 V typical
without going to breakdown.
The switching is controlled by an integrated Mobile Industry
Processor Interface (MIPI) decoder.
The SKY19237-001 is provided in a compact 11-bump,
1.685 × 1.775 × 0.5 mm WLCSP that meets requirements for
board-level assembly. Bump diameters are 262 m, with a
minimum bump pitch of 400 m.
A functional block diagram is shown in Figure 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
203878A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 12, 2016
1