SKY13626-685LF Datasheet, PDF (1/2 Pages) Skyworks Solutions Inc. – 0.4 to 3.8 GHz SP4T Switch

PRODUCT SUMMARY
SKY13626-685LF: 0.4 to 3.8 GHz SP4T Switch
Applications
 Cellular systems
 3G/4G LTE systems
 Pre- and post-PA switching
Features
 Broadband frequency range: 0.4 to 3.8 GHz
 Low insertion loss
 High isolation
 Integrated GPIO interface
 No DC blocking capacitors required
 Lead (Pb)-free and RoHS-compliant
 Small-size QFN (9-pin, 1.1  1.1  0.5 mm) package
(MSL1, 260 C per JEDEC J-STD-020)
Skyworks Green^TM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green^TM, document number
SQ04–0074.
RF1
RF2
RFC
RF3
RF4
Logic and Supply
VDD VC1 VC2
Figure 1. SKY13626-685LF Block Diagram
Description
The SKY13626-685LF is a single-pole, four-throw (SP4T) switch.
No external DC blocking capacitors are required on the RF paths
as long as there is no DC voltage on the RF line. The switch can
operate over the temperature range of −40 C to +90 C.
Switching is controlled by two CMOS/TTL compatible control
voltage inputs (VC1 and VC2). Depending on the logic voltage level
applied to the control pin, the RFC pin is connected to one of four
switched RF outputs (RF1, RF2, RF3, or RF4) by using a low
insertion loss path, while the path between the RFC pin and the
other RF pins is in isolation.
The SKY13626-685LF is provided in a small-size, 9-pin,
1.1  1.1  0.5 mm QFN package.
A functional block diagram is shown in Figure 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
204180A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 19, 2016
1