SKY13392-359LF Datasheet, PDF (1/10 Pages) Skyworks Solutions Inc. – 0.02-4.0 GHz High Isolation SP4T Absorptive Switch With Decoder

DATA SHEET
SKY13392-359LF: 0.02-4.0 GHz High Isolation SP4T
Absorptive Switch With Decoder
Applications
• GSM/CDMA/WCDMA/LTE cellular infrastructure
• Test and measurement systems
• Military communications
Features
• Broadband frequency range: 0.02 GHz to 4.0 GHz
• Low insertion loss: 1.0 dB @ 2 GHz
• Typical isolation: 54 dB @ 2 GHz
• Positive voltage control: 0/3 V to 0/5 V
• Isolated ports are absorptive from 500 MHz to 4 GHz
• Small, QFN (16-pin, 4 x 4 mm) package (MSL1, 260 °C per
JEDEC J-STD-020)
Figure 2. SKY13392-359LF Pinout – 16-Pin QFN
(Top View)
Figure 1. SKY13392-359LF Block Diagram
Description
The SKY13392-359LF is a symmetrical, single-pole, four-throw
(SP4T) switch. The switch is intended for GSM/CDMA/WCDMA/LTE
cellular infrastructure applications. The impedance of the RF ports
in isolation is 50 Ω at frequencies above 500 MHz.
The SKY13392-359LF is manufactured using Skyworks state-of-
the-art GaAs pHEMT process. The SKY13392-359LF features
integrated logic that uses only two control lines for switch
operation.
The SKY13392-359LF SP4T switch is provided in a compact Quad
Flat No-Lead (QFN) 4 x 4 mm package. A functional block diagram
is shown in Figure 1. The pin configuration and package are
shown in Figure 2. Signal pin assignments and functional pin
descriptions are provided in Table 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201854B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 2, 2012
1