SE2431L_15 Datasheet, PDF (1/13 Pages) Skyworks Solutions Inc. – Smart meters

DATA SHEET
SE2431L: 2.4 GHz Front-End Module
Applications
 Smart meters
 In-home appliances
 Smart thermostats
Features
 Integrated:
– PA with up to +24 dBm output power
– LNA with programmable bypass
– Antenna switching with Tx and Rx diversity function
 Suitable for Zigbee^®, Bluetooth^® Low Energy, and Bluetooth 1.0
 Typical low NF: 2 dB
 Operating temperature range: –40 °C to +125 °C
 Single-ended 50 Ω Tx/Rx RF interface
 Fast switch on/off time <1 μs
 Supply operation: 2.0 V to 3.6 V
 Sleep mode current: 0.05 μA typical
 Small QFN (24-pin, 3.0 mm x 4.0 mm x 0.9 mm Nickel-
Palladium-gold [NiPdAu] plated) package
(MSL1, 260°C per JEDEC J-STD-020)
Skyworks Green^TM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green^TM, document number
SQ04–0074.
PA
TR
Logic
Control
ANT1
ANT2
LNA
Y1934
Figure 1. SE2431L Block Diagram
Description
The SE2431L is a high-performance, fully integrated RF front-end
module (FEM), suitable for Zigbee, Bluetooth Low Energy, and
Bluetooth 1.0 applications.
The SE2431L is designed for ease of use and maximum flexibility,
with fully matched 50 Ω input and output, integrated inter-stage
matching and harmonic filter, and digital controls that are
compatible with 1.6 V to 3.6 V Complementary Metal Oxide
Semiconductor (CMOS) levels.
The RF blocks operate over a wide supply voltage range from
2.0 V to 3.6 V, which allows the SE2431L to be used in battery-
powered applications over a wide spectrum of the battery
discharge curve.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202410J • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2015
1