DSM8100-000_08 Datasheet, PDF (1/5 Pages) Skyworks Solutions Inc. – Designed for switching applications

DATA SHEET
DSM8100-000: Mesa Beam-Lead PIN Diode
Applications:
G _{Designed for switching applications}
Features
G _{Low capacitance}
G _{Low resistance}
G _{Fast switching}
G _{Oxide-nitride passivated}
G _{Durable construction}
G _{Lead (Pb)-free, RoHS-compliant, and Green™}
Description
Skyworks Silicon Mesa Beam-Lead PIN diode is surrounded by a
glass frame for superior strength and electrical performance that
surpasses the standard beam-lead PINs. The DSM8100-000 is
designed for low resistance, low capacitance and fast switching
time. The oxide-nitride passivation layers provide reliable opera-
tion and stable junction parameters that provide complete sealing
of the junction permitting use in assemblies with some degree of
moisture sealing. A layer of glass provides increased mechanical
strength.
The DSM8100 is designed for microstrip or stripline circuits and
for circuits requiring high isolation from a series-mounted diode
such as broadband multithrow switches, phase shifters, limiters,
attenuators and modulators.
NEW Skyworks Green™ products are RoHS (Restriction
of Hazardous Substances)-compliant, conform to
the EIA/EICTA/JEITA Joint Industry Guide (JIG)
Level A guidelines, are halogen free according to
IEC-61249-2-21, and contain <1,000 ppm antimony
trioxide in polymeric materials.
Absolute Maximum Ratings
Characteristic
Value
Operating temperature
-65 °C to +150 °C
Storage temperature
-65 °C to +200 °C
Power dissipation (derate
linearly to zero @ 175 °C)
250 mW
Typical lead strength
8 grams pull
Reverse voltage
60 V
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum Ratings. Exceeding
any of the absolute maximum/minimum specifications may result in permanent damage to the
device and will void the warranty.
CAUTION: Although these devices are designed to be robust, ESD
(Electrostatic Discharge) can cause permanent damage.
Static charges may easily produce potentials of several
kilovolts on the human body or equipment, which can
discharge without detection. Industry-standard ESD
precautions must be employed at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200096 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 14, 2008
1