DSG9500-000_09 Datasheet, PDF (1/5 Pages) Skyworks Solutions Inc. – Designed for switching applications

data sheet
DSG9500-000: Planar Beam-Lead PIN Diode
Applications
l _{Designed for switching applications}
Features
l _{Low capacitance}
l _{Low resistance}
l _{Fast switching}
l _{Oxide-nitride passivated}
l _{Durable construction}
l _{High voltage}
^l Lead (Pb)-free, RoHS-compliant, and Green™
Description
The DSG9500-000 silicon planar beam-lead PIN diode is designed
for low resistance, low capacitance and fast switching time.
The oxide-nitride passivation layers protect the diode junction to
provide excellent reliability and stable electrical performance,
especially when the diode is housed in a hermetically sealed
assembly to further protect the junction from moisture.
The DSG9500-000 is designed for microstrip or stripline circuits
and for circuits requiring high isolation from a series-mounted
diode such as broadband multithrow switches, phase shifters,
limiters, attenuators and modulators.
NEW Skyworks Green™ products are RoHS (Restriction
of Hazardous Substances)-compliant, conform to
the EIA/EICTA/JEITA Joint Industry Guide (JIG)
Level A guidelines, are halogen free according to
IEC-61249-2-21, and contain <1,000 ppm antimony
trioxide in polymeric materials.
Absolute Maximum Ratings

Characteristic
Value
Operating temperature
-65 °C to +150 °C
Storage temperature
-65 °C to +200 °C
Power dissipation (derate
linearly to zero @ 175 °C)
250 mW
Typical lead strength
8 grams pull
Reverse voltage
100 V
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum Ratings. Exceeding
any of the absolute maximum/minimum specifications may result in permanent damage to the
device and will void the warranty.
CAUTION: A lthough these devices are designed to be robust, ESD
(Electrostatic Discharge) can cause permanent damage.
Static charges may easily produce potentials of several
kilovolts on the human body or equipment, which can
discharge without detection. Industry-standard ESD
precautions must be employed at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200137 Rev. H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 29, 2008
1