APD0505-000 Datasheet, PDF (1/4 Pages) Skyworks Solutions Inc. – Silicon PIN Diode Chips

DATA SHEET
APD Series: Silicon PIN Diode Chips
Features
G _{Established Skyworks PIN diode process}
G _{For switch and attenuator applications}
G _{Low capacitance designs to 0.05 pF}
G _{Voltage ratings to 100 V}
G _{Chip size smaller than 15 mils square}
G _{Available lead (Pb)-free, RoHS-compliant, and Green}
Description
Skyworks APD Series of silicon PIN diode chips is designed for
use as switch and attenuator devices in high-performance hybrid
microwave integrated circuits. These PIN diode designs are
useful over a wide range of frequencies from below 100 MHz to
beyond 30 GHz. These devices utilize Skyworks well-established
silicon technology resulting in high resistivity and tightly con-
trolled I region width PIN diodes. APD0505-00 through
APD0810-000 are primarily designed for fast speed through
moderate speed switch applications. They have low resistance
and capacitance at zero bias and reverse bias. The thick I region
APD2220-000 is primarily designed for low-distortion attenuator
applications.
NEW Skyworks Green products are lead (Pb)-free, RoHS
(Restriction of Hazardous Substances)-compliant,
conform to the EIA/EICTA/JEITA Joint Industry Guide
(JIG) Level A guidelines, and are free from antimony
trioxide and brominated flame retardants.
Absolute Maximum Ratings
Characteristic
Value
Power dissipation
Operating temperature
Pdiss = ^175-Tamb W
θ
-65 °C to +175 °C
Storage temperature
-65 °C to +200 °C
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200075 Rev. F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 26, 2007
1