AK802D4-24 Datasheet, PDF (1/2 Pages) Skyworks Solutions Inc. – GaAs IC 4 Bit Digital Attenuator With Driver 1 dB LSB DC-2 GHz

GaAs IC 4 Bit Digital Attenuator
With Driver 1 dB LSB DC–2 GHz
AK802D4-24
Features
■ Attenuation in 1 dB Steps to 15 dB
■ Low Cost SOIC-14 Plastic Package
■ Low DC Current < 16 mA Total
■ Integral Driver +5 V, -5.6 V Supply Voltages
Description
The AK802D4-24 is an IC FET digital attenuator
consisting of four monolithic attenuators with an LSB of
1 dB and a total attenuation of 15 dB with all attenuators
connected.
The device has integral drivers for each bit requiring less
than 4 mA per bit. DC supply voltages of +5 and -5.6 V
are required.
The attenuator is packaged in a 14 lead plastic SOIC.
SOIC-14
0.050 (1.27 mm)
0.016 (0.40 mm)
0.158 (4.01 mm)
0.150 (3.81 mm)
PIN 1
INDICATOR
PIN 1
0.068
(1.73 mm) MAX.
PIN 14
0.050
(1.27 mm) BSC
0.244
(6.20 mm)
0.228
(5.80 mm)
0.020 (0.51 mm)
0.013 (0.33 mm)
0.049 (1.24 mm)
0.016 (0.41 mm)
0.016 MAX.
(0.41 mm)
x 45˚
CHAMFER
8˚ MAX.
0.344 (8.75 mm)
0.337 (8.55 mm)
0.010 (0.25 mm)
0.0098 (0.25 mm)
0.004 (0.10 mm)
0.0075 (0.19 mm)
0.158 (4.00 mm)
0.150 (3.80 mm)
Electrical Specifications at 25°C (+5 V, -5.6 V)
Insertion Loss³
Parameter¹
Attenuation Accuracy Per Bit⁴
VSWR (I/O)
Frequency²
DC–0.5 GHz
DC–1.0 GHz
DC–2.0 GHz
DC–1.0 GHz
DC–2.0 GHz
DC–1.0 GHz
DC–2.0 GHz
Min.
Typ. Max. Unit
1.7
2.0
dB
2.2
2.5
dB
3.1
3.5
dB
(7% or 0.25 dB
dB
Whichever is Greater)
(10% or 0.5 dB
dB
Whichever is Greater)
1.2:1
1.4:1
1.3:1
1.5:1
Operating Characteristics at 25°C (+5 V, -5.6 V)
Parameter
Switching Characteristics⁵
Input Power for 1 dB Compression
Condition
Rise, Fall (10/90% or 90/10% RF)
On, Off (50% CTL to 90/10% RF)
Video Feedthru
Control Voltages
Supply Voltages^6,7
V_Low
V_High
+5.0 V ± 0.20 V @ 4 mA Typ.
-5.6 V ± 0.20 V @ 12 mA Typ.
1. All measurements made in a 50 Ω system, unless otherwise specified.
2. DC = 300 kHz.
3. Insertion loss changes by 0.003 dB/°C.
4. Attenuation referenced to insertion loss.
5. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth.
6. Protection circuit for driver included in package.
7. Current drain @ 85°C = 6 mA Typ. @ +5 V, 16 mA Typ. @ -5 V.
Frequency
0.5–1.0 GHz
0.05 GHz
Min.
0.0
4.5
4.8
-5.4
Typ.
15
30
30
+24
+16
Max.
0.2
5.0
5.2
-5.8
Unit
ns
ns
mV
dBm
dBm
V
V
V
V
Skyworks Solutions, Inc. [978] 241-7000 • Fax [978] 241-7906 • Email [e-mail] • www.skyworksinc.com
1
Specifications subject to change without notice. 3/99A