GXFIBER-SFP Datasheet, PDF (2/2 Pages) SIXNET Technology Park – INDUSTRIAL ETHERNET GIGABIT FIBER TRANSCEIVERS

industrial fast ethernet fiber transceivers
Transmitter optical characteristics:
Parameter
Rating¹
Output Optical Power From
Multimode Fiber
550M, 2km²
Output Optical Power From
Single Mode Fiber
10km
30km
50km
80km
Extinction Ratio
Output Center Wavelength
550m
2km²
10km,30km
50km, 80km
Spectral Width (RMS)
550m
2km
10km
Spectral Width (-20dB)
30km, 50km, 80km
Side Mode Suppression Ratio
30km, 50km, 80km
Rise/Fall time (10%-90%)
-
Relative Intensity Noise
-
Total Jitter
-
Output Eye
Compliant with IEEE802.3z
receiver optical characteristics:
Optical Input Power
550m
2km
10km, 30km, 50km, 80km
Sensitivity
550m
2km
10km
30km, 50km, 80km
Operating Wavelength
550m
2km
10km, 30km, 50km, 80km
Loss of Signal - Asserted
550m
2km
10km
30km,50km, 80km
Loss of Signal - Deasserted
550m
2km
10km
30km,50km, 80km
Min.
-9
-9
-4
-4
0
9
830
1270
1280
1500
-
-
-
-
30
-
-
-
-
-
-
-
-
770
1260
1260
-32
-35
-35
-35
-45
Typ. Max. Unit
-
-3
dBm
-
-
-
850
1310
1310
1550
-
-
-
-
-
-
-
-
-3
2
2
5
-
860
1355
1355
1580
0.85
4
4
1
-
260
-117
227
dBm
dB
nm
nm
nm
dB
ps
dB/Hz
ps
0
-
-3
dBm
-3
-
-18
-
-20 dBm
-
-20
-
-23
- 1610 nm
-
-
-
-
-
-
dBm
-
-
-18
-
-20
-20
dBm
-23
gxfiber-sfp
Note
For MM fiber
For SM fiber
For MM fiber
For MM fiber
For SM fiber
For SM fiber
For SM fiber
For MM fiber
For MM fiber
For SM fiber
For SM fiber
For SM fiber
-
-
-
For MM fiber
For MM fiber
For SM fiber
For MM fiber
For SM fiber
For SM fiber
For SM fiber
For MM fiber
For MM fiber
For SM fiber
For MM fiber
For MM fiber
For SM fiber
For SM fiber
For MM fiber
For MM fiber
For SM fiber
For SM fiber
Note 1: The distance rating is for reference only. For accurate distance estimations, the power budget should be used.
Note 2: The 2 km transmission distance corresponds to using the special GMFIBER-SFP-2K transceiver with multimode fiber cable.
This transceiver offsets the transmitted light (so no mode conditioning patch cord is required) and is specifically for use with multimode
fiber cable. It is recommended that this transceiver be used on both ends of the cable for best performance. Do not use this transceiver
with singlemode fiber cable.
All specifications are subject to change. Consult factory for latest info.
SIXNET Technology Park
331 Ushers Road • Ballston Lake, NY 12019 • USA
1.518.877.5173 • Fax [phone] • [e-mail]
solutions for your industrial networking challenges
Datasheet gxfiber-sfp
Rev: 15 June, 2009
www.sixnet.com