|
ST7636 Datasheet, PDF (1/99 Pages) Sitronix Technology Co., Ltd. – 65K Color Dot Matrix LCD Controller/Driver | |||
|
ST
Sitronix
ST7636
1. INTRODUCTION
65K Color Dot Matrix LCD Controller/Driver
The ST7636 is a driver & controller LSI for 65K color graphic dot-matrix liquid crystal display systems. It generates 396
Segment and 132 Common driver circuits. This chip is connected directly to a microprocessor, accepts Serial Peripheral
Interface (SPI) or 8-bit/16-bit parallel display data and stores in an on-chip display data RAM. It performs display data RAM
read/write operation with no external operating clock to minimize power consumption. In addition, because it contains
power supply circuits necessary to drive liquid crystal, it is possible to make a display system with the fewest components.
2. FEATURES
Driver Output Circuits
⦠396 segment outputs / 132 common outputs
Applicable Duty Ratios
⦠Various partial display
⦠Partial window moving & data scrolling
Gray-Scale Display
⦠4FRC & 31 PWM function circuit to display
⦠64 gray-scale display.
On-chip Display Data RAM
⦠Capacity: 132 · 132 · 16 =278,784bits
⦠65K colors (RGB)=(565) mode
⦠Dithered 262K colors (RGB)=(666) mode
⦠Dithered 16M colors (RGB)=(888) mode
Microprocessor Interface
⦠8/16-bit parallel bi-directional interface with 6800-series
or 8080-series
⦠4-line serial interface (4-line-SIF)
⦠3-line serial interface (3-line-SIF)
On-chip Low Power Analog Circuit
⦠On-chip oscillator circuit
⦠Voltage converter (x2, x3, x4, x5, x6, x7, x8)
⦠Voltage regulator
⦠On-chip electronic contrast control function (406 steps)
⦠Voltage follower (LCD bias: 1/5 to 1/12)
Operating Voltage Range
⦠Supply voltage (VDD, VDD1): 2.4 to 3.3V
(VDD2, VDD3, VDD4, VDD5): 2.4 to
3.3V
⦠LCD driving voltage (VOP = V0 - VSS): 3.76 to 18.0 V
⦠the suggested value of V0 is 12~15 V under bias =1/11.
LCD Driving Voltage (EEPROM)
⦠To store contrast adjustment value for better display
Package Type
⦠Application for COG
ST7636 6800 , 8080 ,4-Line , 3-Line interface
Ver 1.3
1/99
2006/08/15
|
▷ |