ST7586S Datasheet, PDF (1/63 Pages) Sitronix Technology Co., Ltd. – 4-Level Gray Scale Dot Matrix LCD Controller/Driver

ST
Sitronix
ST7586S
4-Level Gray Scale Dot Matrix LCD Controller/Driver
INTRODUCTION
ST7586S is a driver & controller LSI for 4-level gray scale graphic dot-matrix liquid crystal display systems. It contains
384-segment and 160-common driver circuits. This chip can be connected directly to a microprocessor which accepts 8-bit
parallel interface (8080-series or 6800-series type), 4-Line serial interface or 3-Line serial interface. Display data is stored
into an on-chip Display Data RAM (DDRAM). It performs the Display Data RAM read/write operation without external
operating clock, and the power consumption can be minimized. In addition, since all necessary power supply circuits for LCD
system are built-in, ST7586S constructs a LCD display system with the fewest components.
FEATURES
Single-chip LCD controller/driver
Driver Output Circuits
♦ 384 segment outputs / 160 common outputs
On-chip Display Data RAM
♦ Capacity: 384 x 160 x 2 = 122,880 bits
Various Partial Display Features
♦ Applicable partial duty
♦ Partial window moving & data scrolling
Microprocessor Interface
♦ 8-bit parallel bi-directional interface supports
6800-series or 8080-series MPU
♦ 4-Line serial interface
♦ 3-Line (9-bit) serial interface
On-chip Low Power Analog Circuit
♦ On-chip oscillator circuit
♦ Voltage booster with built-in boost-capacitors
♦ Extremely few external components: 4 capacitors
♦ Built-in voltage regulator with programmable contrast
♦ Built-in voltage follower supports LCD bias voltage
Available bias: 1/9 ~ 1/14
Operating Voltage Range
♦ Digital Power (VDD1): 1.8V ~ 3.3V (TYP.)
♦ Analog Power (VDD2~VDD5, VDDX):
2.8V ~ 3.3V (TYP.)
♦ LCD operation voltage (Vop = V0-XV0) : 18V
Built-in OTP−ROM for LCD Vop Optimization
Package Type: COG
ST7586S 6800, 8080, 4-Line & 3-Line Interface
Sitronix Technology Corp. reserves the right to change the contents in this document without prior notice.
Ver-1.1a
1/63
2009/11/30