ST7036 Datasheet, PDF (1/70 Pages) List of Unclassifed Manufacturers – Dot Matrix LCD Controller/Driver

ST
Sitronix
ST7036
Dot Matrix LCD Controller/Driver
Features
5 x 8 dot matrix possible
Low power operation support:
-- 2.7 to 5.5V
Range of LCD driver power
-- 3.0 to 7.0V
4-bit, 8-bit, serial or I²C-bus MPU interface
enabled
80 x 8-bit display RAM (80 characters max.)
10,240-bit character generator ROM for a
total of 256 character fonts(max)
64 x 8-bit character generator RAM(max)
Support two display mode:
16-com x 100-seg and 80 ICON
24-com x 80-seg and 80 ICON
16 x 5 –bit ICON RAM(max)
Wide range of instruction functions:
Display clear, cursor home, display on/off,
cursor on/off, display character blink, cursor
shift, display shift, double height font
Automatic reset circuit that initializes the
controller/driver after power on and external
reset pin
Internal oscillator(Frequency=540kHz) and
external clock
Built-in voltage booster and follower circuit
(low power consumption )
COM/SEG direction selectable
Multi-selectable for CGRAM/CGROM size
Instruction compatible to ST7066U and
KS0066U and HD44780
Available in COG type
Description
The ST7036 dot-matrix liquid crystal display controller can
display alphanumeric, Japanese kana characters, and
symbols. It can be configured to drive a dot-matrix liquid
crystal display under the control of a 4 / 8-bit with
6800-series, serial or fast I²C interface microprocessor.
Since all the functions such as display RAM, character
generator ROM/RAM and liquid crystal driver, required for
driving a dot-matrix liquid crystal display are internally
provided on one chip, a minimal system can be used with
this controller/driver.
The ST7036 character generator ROM size is 256 5x8dot
bits which can be used to generate 256 different character
fonts (5x8dot).
The ST7036 is suitable for low voltage supply (2.7V to
5.5V) and is perfectly suitable for any portable product
which is driven by the battery and requires low power
consumption.
The display resolution of ST7036 dot-matrix LCD driver
can be either 1-line x 20 characters, 2-line x 20 characters
or 3-line x 16 characters with 80 bit ICON.
The ST7036 dot-matrix LCD driver does not need extra
cascaded drivers.
product Name
ST7036-0A
-
Character generator
ROM Size
256
-
OPR1 OPR2 Support Character
1
1 English / Japan/Europe
-
-
-
ST7036
ST7036i
6800-4bit / 8bit,4-Line interface
(without IIC interface)
IIC interface
V1.7a
1/70
2007/10/17