SRM-1016 Datasheet, PDF (1/6 Pages) SIRENZA MICRODEVICES – 800 - 1000 MHz High Linearity Active Receive Mixer

Product Description
The Sirenza Microdevices’ SRM-1016 is a high linearity
active mixer for use in a wide variety of communication
systems covering the 800-1000 MHz frequency bands.
This device operates from a single 5V supply and provides
10dB of conversion gain while requiring only 0dBm input to
the integrated LO driver. The SRM-1016 also includes an
integrated on chip IF amplifier and is fabricated using Sili-
con Germanium (SiGe) device technology.
SRM-1016
800 - 1000 MHz High Linearity
Active Receive Mixer
The RF and LO ports can be driven differential or single
ended. Each broadband port has been designed to mini-
mize performance degradation while operating into highly
reactive components such as SAW filters. The device is
packaged in an industry standard 16 pin TSSOP with
exposed paddle for superb RF and thermal ground.
Functional Block Diagram
IFP 1
VCC 2
VEE 3
16 IFN
15 VCC
14 VEE
RFP 4
RFN 5
VEE 6
VCC 7
13 LOP
12 LON
11 VEE
10 VCC
L1 8
9 L2
16 pin TSSOP with Exposed Ground Pad
Package Footprint: 0.197 x 0.252 inches (5.0 x 6.4 mm)
Package Height: 0.039 inches (1.0 mm)
Product Features
• Active mixer with 10dB conversion gain
• Integrated 0dBm LO drive and IF amplifier
• Differential or single-ended input
• Single supply operation (+5V)
• Broadband resistive 50Ω impedances on all
three ports
Applications
• 800-1000 MHz receivers
Product Specifications
Parameters
RF Frequency Range
Test Conditions: T_A = 25ºC, V_CC = 5.0V
P_LO = 0dBm, P_RF = -20dBm, IF = 200MHz
Unit
MHz
Min.
800
Typ.
Max.
1000
LO Frequency Range
MHz
500
1000
IF Frequency Range
MHz
30
200
300
Conversion Gain
dB
7
10
SSB Noise Figure
dB
15
19
Input IP3
RF1 = RF2 = -15 dBm/tone, 1 MHz spacing
dBm
+15
+19
Input P1dB
dBm
+2
+5
Leakage (LO-RF)
Single-ended configuration, see Note 1, page 3
dBm
-40
-35
Leakage (LO-IF)
Single-ended configuration, see Note 1, page 3
dBm
-26
-20
Leakage (RF-IF)
RF, LO, IF Return Loss
Supply Voltage (Vcc)
Single-ended configuration, see Note 1, page 3
Matched to 50Ω, see Note 2, page 3
dBm
dB
V
+4.75
-40
20
+5.0
-35
+5.25
Supply Current
LO Drive
Thermal Resistance
Matched to 50Ω, see Note 2, page 3
junction-case
mA
dBm
-3
ºC/W
160
180
0
+3
46
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or ommisions.
Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without
notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product
for use in life-support devices and/or systems.
Copyright 2002 Sirenza Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94085
Phone: (800) SMI-MMIC
http://www.sirenza.com
1
EDS-102145 Rev B