MUR860 Datasheet, PDF (1/4 Pages) Shanghai Lunsure Electronic Tech – 8Amp super fast glass passivated rectifier 600volts

ELECTRONIC
MUR860
Ultrafast Rectifier - 8Amp 600Volt
□ Features
-Epoxy Meets UL 94V-0
-Higjt Voltage Capability
-Low Leakage Current
-High Temperature Glass Passivated Junction
-Pb-Free Packages is Available
□ Mechanical Characteristics
-Case: Epoxy, Molded
-Weight: 1.9 grames(Approximately)
-Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
-Lead Temperature for Soldering Purposes: 260 ºC Max for 10 Seconds
□ Maximum ratings
Rating
Peak Repetitive Reverse Voltage
Average Rectified Forward Current
Total Device(Rated VR), TC = 150 ºC
Peak Repetitive Forward Current
(Rated VR, Square Wave, 20kHZ), TC = 150 ºC
Nonrepetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60HZ)
Operating Junction Temperature and Storage Temperature Range
Symbol
VRRM
IF(AV)
IFM
IFSM
TJ, Tstg
Value
Unit
600
V
8
A
16
A
100
A
-65 to +175
ºC
□ Electrical characteristics
Rating
Maximum Instantaneous Forward Voltage (Note 1)
IF = 8.0A, TC = 150 ºC
IF = 8.0A, TC = 25 ºC
Maximum Instantaneous Reverse Current (Note 1)
Rated DC Voltage, TJ = 150 ºC
Rated DC Voltage, TJ = 25 ºC
Maximum Reverse Recovery Time
IF = 1.0A, di/dt = 50A/μs
IF = 0.5A, IR = 1.0A, IREC = 0.25A
Maximum Thermal Resistance, Junction-to-Case
Note: 1.Pulse Test : Pulse Width = 300μs, Duty Cycle ≦ 2.0%
Symbol
VF
IR
trr
RθJC
Value
Unit
1.2
V
1.5
500
μA
10
60
ns
50
2.0
ºC/W
August 2007 / Rev.5
1
http:// www.sirectsemi.com