SP502 Datasheet, PDF (7/32 Pages) Sipex Corporation – Multi-Mode Serial Transceiver

PINOUT…
Pin 70 — RD(a) — Receive Data, analog input;
inverted; source for RxD.
Pin 71 — RD(b) — Receive Data; analog input;
non-inverted; source for RxD.
RxD 1
RDEC0 2
RDEC1 3
RDEC2 4
RDEC3 5
ST/TT 6
GND 7
VCC 8
TDEC3 9
TDEC2 10
TDEC1 11
TDEC0 12
DTR 13
TxD 14
TxC 15
RTS 16
RL 17
NC 18
DCD 19
RxC 20
SP502
60 GND
59 SD(b)
58 TR(a)
57 GND
56 TR(b)
55 VCC
54 RS(a)
53 GND
52 RS(b)
51 LL(a)
50 GND
49 LL(b)
48 VCC
47 RL(a)
46 GND
45 RL(b)
44 ST(b)
43 GND
42 ST(a)
41 VCC
Note: NC (No Connection) pins should be left floating.
Internal signals may be present.
PIN ASSIGNMENTS…
CLOCK AND DATA GROUP
Pin 1 — RxD — Receive Data; TTL output,
sourced from RD(a) and RD(b) inputs.
Pin 14 — TxD — TTL input ; transmit data
source for SD(a) and SD(b) outputs.
Pin 15 — TxC — Transmit Clock; common
TTL input for both ST and TT driver outputs.
Pin 20 — RxC — Receive Clock; TTL output
sourced from RT(a) and RT(b) inputs.
Pin 37 — RT(a) — Receive Timing; analog
input, inverted; source for RxC.
Pin 38 — RT(b) — Receive Timing; analog
input, non-inverted; source for RxC.
Pin 42 — ST(a) — Send Timing; analog output,
inverted; sourced from ST.
Pin 44 — ST(b) — Send Timing; analog output,
non-inverted; sourced from ST.
Pin 59 — SD(b) — Analog Out — Send data,
non-inverted; sourced from TxD.
Pin 61 — SD(a) — Analog Out — Send data,
inverted; sourced from TxD.
Pin 63 — TT(a) — Analog In or Out —
Terminal Timing, inverted; sourced to TxC or
RxT.
Pin 65 — TT(b) — Analog In or Out —
Terminal Timing, non–inverted; sourced to TxC
or RxT.
CONTROL LINE GROUP
Pin 13 — DTR — Data Terminal Ready; TTL
input; source for TR(a) and TR(b) outputs.
Pin 16 — RTS — Ready To Send; TTL input;
source for RS(a) and RS(b) outputs.
Pin 17 — RL — Remote Loopback; TTL input;
source for RL(a) and RL(b) outputs.
Pin 19 — DCD— Data Carrier Detect; TTL
output; sourced from RR(a) and RR(b) inputs.
Pin 21 — RI — Ring In; TTL output; sourced
from IC(a) and IC(b) inputs.
Pin 24 — LL — Local Loopback; TTL input;
source for LL(a) and LL(b) outputs.
Pin 35 — RR(a)— Receiver Ready; analog
input, inverted; source for DCD.
Pin 36 — RR(b)— Receiver Ready; analog
input, non-inverted; source for DCD.
Pin 39 — IC(a)— Incoming Call; analog input,
inverted; source for RI.
Pin 40 — IC(b)— Incoming Call; analog input,
non-inverted; source for RI.
Pin 45 — RL(b) — Remote Loopback; analog
output, non-inverted; sourced from RL.
Pin 47 — RL(a) — Remote Loopback; analog
output inverted; sourced from RL.
Pin 49— LL(b) — Local Loopback; analog
output, non-inverted; sourced from LL.
Pin 51 — LL(a) — Local Loopback; analog
output, inverted; sourced from LL.
Pin 52 — RS(b) — Ready To Send; analog
output, non-inverted; sourced from RTS.
Pin 54 — RS(a) — Ready To Send; analog
output, inverted; sourced from RTS.
Pin 56 — TR(b) — Terminal Ready; analog
output, non-inverted; sourced from DTR.
Pin 58 — TR(a) — Terminal Ready; analog
output, inverted; sourced from DTR.
Pin 66 — CS(a)— Clear To Send; analog input,
inverted; source for CTS.
Pin 67 — CS(b)— Clear To Send; analog input,
non-inverted; source for CTS.
Pin 68 — DM(a)— Data Mode; analog input,
inverted; source for DSR.
Pin 69 — DM(b)— Data Mode; analog input,
non-inverted; source for DSR.
Rev. 7/21/03
SP502 Multi-Mode Serial Transceiver
7
© Copyright 2003 Sipex Corporation