English
Language : 

SPX385-2.5 Datasheet, PDF (2/9 Pages) Sipex Corporation – Micropower Voltage Reference
ABSOLUTE MAXIMUM RATINGS
Stresses greater than those listed under ABSOLUTE MAXIMUM RAT-
INGS may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is not
implied. Exposure to absolute maximum rating conditions for extended
periods may affect reliability.
Reverse Current (IKA) ............................................................. 30mA
Forward Current (IAK) ............................................................. 10mA
Operating Temperature Range (TA) ............................ -40 to +85°C
Junction Temperature (TJ) ..................................................... 150°C
Storage Temperature (TSTG) ....................................... - 65 to 150°C
Lead Temperature (Soldering 10 sec.), TL ............................. 300°C
TYPICAL THERMAL RESISTANCES
PACKAGE
TO-92
0JA
0JC
160°C/W 80°C/W
TYPICAL DERATING
6.3 mW/°C
SOT-23
SOIC-8
SOT-89
575°C/W 150°C/W
175°C/W 45°C/W
110°C/W 8°C/W
1.7 mW/°C
5.7 mW/°C
9.1 mW/°C
Typical deratings of the thermal resistances are
given for ambient temperature >25°.
IIN = 100µA, TA = 25°C, unless otherwise specified.
PARAMETER
Reference Voltage
Dynamic Output
Impedance
Reference Voltage
Change with IR.
Temperature Coefficient
Minimum Operating Current
Output Wideband Noise
Long Term Stability
Operating Temperature
CONDITIONS
F = 20Hz
IR = 100µA
20µA ≤ IR ≤ 20mA
Note 1
10Hz ≤ f ≤ 10kHz
T=1000Hr;
TA = 25°C ±0.1°C
ELECTRICAL CHARACTERISTICS
SPX385A-2.5
SPX385-2.5
MIN. TYP. MAX MIN. TYP. MAX. UNIT
2.475 2.500 2.525 2.450 2.500 2.550 V
0.6 1.0
0.6 1.0
Ω
10 20
10 20 mV
60 100
15 20
120
60
60 100 ppm/°C
15 20 µA
120
µVrms
60
ppm
-40
+85 -40
+85 °C
Note 1. Three-point measurement guarantees the error band over the specified temperature range.
*CALCULATING AVERAGE TEMPERATURE COEFFICIENT (TC)
ppm %
mV
0
0
0
-10
5000 0.5
DVKA
D
0
15 30 45 60 75 90 105
Junction Temperature (°C)
TC in mV/°C = DVKA (mV)
DTA
( ) TC in %/°C =
DVKA
DVKA at 25°C
x 100
DTA
( ) DVKA
DVKA at 25°C
x 106
TC in ppm/°C =
DTA
0.07 mV/°C
0.003 %/°C
27 ppm/°C
Figure 2. VKA vs. Temperature
Date:05/21/04
SPX385-2.5 Micropower Voltage Reference
2
© Copyright 2004 Sipex Corporation