SP6683 Datasheet, PDF (2/10 Pages) Sipex Corporation – High Power LED Driver for Parallel Configuration

V_IN, V_MODE, V_OUT and EN/PWM ................. -0.3V to 6V
V_IN - V_OUT ........................................................... 0.7V
Output Current (I_OUT) ...................................... 300mA
Power Dissipation per Package - 10-pin MSOP
(derate 8.84mW/°C above +70°C) ................. 720mW
Junction Temperature .................................... +125°C
Storage Temperature ...................... -65°C to +150°C
ESD Rating. ................................................ 2kV HBM
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of
the device at these ratings or any other above those
indicated in the operation sections of the specifications
below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may affect
reliability.
ELECTRICAL CHARACTERISTICS
Unless otherwise specified: V_IN =+2.7V to +5.0V, C1=C2=C4=C5=1.0µF (Ceramic, ESR=0.03Ω) and T_AMB =-40°C to
+85°C unless otherwise noted.
PARAMETER
MIN TYP MAX UNITS
CONDITIONS
Input Voltage
2.7
5.5
V
Quiescent Current
Shutdown Current
Maximum Load Current
Oscillator Frequency
V_FB Reference Voltage
Output Resistance
0.8
0.275
0.9
1.0
280
1.2
0.306
7.5
5
3
1.5
1.6
0.337
mA
µA
mA
MHz
V
Ω
Ω
V_IN = 4.2V, V_OUT = 3.6V, I_OUT = 100µA
VEN/PWM = 0V, V_IN = 5.5V
V_IN = 4.2V, V_OUT = 3.6V
V_IN = 3.6V
1.5X Mode, 100mA Load
1.0X Mode, 100mA Load
V_MODE Threshold Voltage
V_MODE Hysteresis
V_MODE Pin Current
EN/PWM Logic Low
1.15 1.25 1.35
30
0.01 0.5
0.4
V V_IN Falling @ 25°C
mV V_IN = 3.6V @ 25°C
µA V_MODE = 1.25 V
V
EN/PWM Logic High
1.6
V
EN/PWM Pin Current
FB Pin Current
V_OUT Ripple
0.01 0.5
0.5
80
µA V_EN/PWM = 4.2V
µA V_FB = 1V
mV V_IN = 5V, V_OUT = 4V, I_OUT = 100mA ,
1.5x Mode
V_OUT Turn-On Time
175 500
µs V_IN = 3.6V, FB within 90% regulation
Date: 07/07/04
SP6683 White LEDs Driver for Parallel Configuration
2
© Copyright 2004 Sipex Corporation