English
Language : 

SP4414 Datasheet, PDF (2/14 Pages) Sipex Corporation – Low Cost Electroluminescent Lamp Driver
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at
these ratings or any other above those indicated in the operation sections
of the specifications below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may affect reliability.
Power Supply, V .........................................................................7.0V
BATT
Input Voltages, ELEN (pin 2)....................................-0.5V to (V +0.5V)
DD
Lamp Outputs...............................................................................200VPP
Operating Temperature...................................................-40˚C to +85˚C
Storage Temperature.....................................................-65˚C to +150˚C
Power Dissipation Per Package
8-pin NSOIC (derate 6.14mW/oC above +70oC)..................................500mW
8-pin µSOIC (derate 4.85mW/oC above +70oC)...................................390mW
The information furnished herein by Sipex has been carefully reviewed
for accuracy and reliability. Its application or use, however, is solely the
responsibility of the user. No responsibility for the use of this information
is assumed by Sipex, and this information shall not explicitly or implicitly
become part of the terms and conditions of any subsequent sales
agreement with Sipex. Specifications are subject to change without
prior notice. By the sale or transfer of this information, Sipex assumes
no responsibility for any infringement of patents or other rights of third
parties which may result from its use. No license or other proprietary
rights are granted by implication or otherwise under any patent or
patent rights of Sipex Corporation.
SPECIFICATIONS
VBATT = 3V, L = 2.7mH, CLAMP = 10nF, and CINT = 100pF unless otherwise noted.
PARAMETER
MIN.
TYP.
MAX.
UNITS
CONDITIONS
Supply Voltage, VDD
Supply Current, ICOIL+IDD
Coil Voltage, V
COIL
ELEN Input Voltage, VELEN
LOW: EL off
HIGH: EL on
Shutdown Current, ISD=ICOIL+IDD
External Oscillator Frequency
2.2
3.0
4.5
V
35
50
mA
V
DD
4.5
V
-0.25
0
0.25V
V
VDD-0.25
VDD
VDD+0.25
1
µA
VELEN=0V, T = 25oC
32
kHz
INDUCTOR DRIVE
Coil Frequency, fCOIL=fLAMPx32
Coil Duty Cycle
8
kHz External Oscillator, 50% Duty Cycle.
87
%
Peak Coil Current, IPK-COIL
EL LAMP OUTPUT
60
mA Guaranteed by design.
EL Lamp Frequency, fLAMP
230
250
270
Hz
Peak-to-Peak Output Voltage
136
160
VPP
SP4414DS/17
SP4414 Electroluminescent Lamp Driver
2
© Copyright 2000 Sipex Corporation