SP432 Datasheet, PDF (2/14 Pages) Sipex Corporation – High Speed, Low Power Quad RS-422 Differential Line Receiver

ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at
these ratings or any other above those indicated in the operation sections
of the specifications below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may affect reliability and
cause permanent damage to the device.
V_CC (SupplyVoltage).......................................................................+7.0V
V_CM (Common Mode Range)...........................................................±14V
V_DIFF (Differential Input Voltage)......................................................±14V
V_IN (Enable Input Voltage)..............................................................+7.0V
T_STG (Storage Temperature Range)..............................-65°C to +150°C
Lead Temperature (4sec)............................................................+260°C
Maximum Current Per Output......................................................±25mA
Storage Temperature....................................................-65°C to +150°C
Power Dissipation Per Package
16-pin PDIP (derate 14.3mW/^oC above +70^oC)........................1150mW
16-pin NSOIC (derate 8.95mW/^oC above +70^oC).......................725mW
ESD
VCC
RI4A RI4B
INPUTS
RI3A RI3B RI2A RI2B
RI1A RI1B
ENABLE
ENABLE
GND
Figure 1. SP432 Block Diagram
R04
R03 R02
OUTPUTS
R01
SP432DS/10
SP432 High Speed, Low Power Quad Differential Line Receiver
2
© Copyright 1997 Sipex Corporation