English
Language : 

SP3223EU Datasheet, PDF (2/25 Pages) Sipex Corporation – High Speed Intelligent +3.0V to +5.5V RS-232 Transceivers
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation
of the device at these ratings or any other above those
indicated in the operation sections of the specifications
below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may
affect reliability and cause permanent damage to the
device.
VCC.......................................................-0.3V to +6.0V
V+ (NOTE 1).......................................-0.3V to +7.0V
V- (NOTE 1)........................................+0.3V to -7.0V
V+ + |V-| (NOTE 1)...........................................+13V
ICC (DC VCC or GND current).........................+100mA
Input Voltages
TxIN, ONLINE,
SHUTDOWN, EN (SP3223EU)...........-0.3V to +6.0V
RxIN...................................................................+25V
Output Voltages
TxOUT.............................................................+13.2V
RxOUT, STATUS.......................-0.3V to (VCC + 0.3V)
Short-Circuit Duration
TxOUT.....................................................Continuous
Storage Temperature......................-65°C to +150°C
Power Dissipation per package
20-pin PDIP (derate 16.0mW/oC above+70oC).....1300mW
20-pin SSOP (derate 9.25mW/oC above +70oC)....750mW
20-pin TSSOP (derate 11.1mW/oC above +70oC)..900mW
28-pin SOIC (derate 12.7mW/oC above +70oC)....1000mW
28-pin SSOP (derate 11.2mW/oC above +70oC).....900mW
28-pin TSSOP (derate 13.2mW/oC above +70oC)......1059mW
32-pin MLPQ (derate 29.4mW/oC above +70oC)........2352mW
NOTE 1: V+ and V- can have maximum magnitudes of 7V, but their absolute difference cannot exceed 13V.
ELECTRICAL CHARACTERISTICS
Unless otherwise noted, the following specifications apply for VCC = +3.0V to +5.5V with TAMB = TMIN to TMAX,
C1 - C4 = 0.1µF. Typical values apply at VCC = +3.3V or +5.0V and TAMB = 25°C.
PARAMETER
DC CHARACTERISTICS
Supply Current,AUTO ON-LINE®
MIN.
TYP.
1.0
Supply Current, Shutdown
1.0
Supply Current,
0.3
AUTO ON-LINE® Disabled
LOGIC INPUTS AND RECEIVER OUTPUTS
Input Logic Threshold
LOW
HIGH
2.4
Input Leakage Current
±0.01
Output Leakage Current
Output Voltage LOW
Output Voltage HIGH
DRIVER OUTPUTS
Output Voltage Swing
±0.05
VCC - 0.6 VCC - 0.1
±5.0
±5.4
Output Resistance
Output Short-Circuit Current
Output Leakage Current
300
±35
MAX.
10
10
1.0
0.8
±1.0
±10
0.4
±60
±25
UNITS CONDITIONS
µA All RxIN open, ONLINE = GND,
SHUTDOWN = VCC, VCC = +3.3V,
TAMB = +25°C, TxIN = GND or VCC
µA SHUTDOWN = GND, VCC = +3.3V,
TAMB = +25°C, TxIN = VCC or GND
mA ONLINE = SHUTDOWN = VCC, no load,
VCC = +3.3V, TAMB = +25°C, TxIN = GND or VCC
VCC = +3.3V or +5.0V, TxIN, EN(SP3223EU),
V ONLINE, SHUTDOWN
V
µA TxIN, EN, ONLINE, SHUTDOWN,
TAMB = +25°C, VIN = 0V to VCC
µA Receivers disabled, VOUT = 0V to VCC
V IOUT = 1.6mA
V IOUT = -1.0mA
V All driver outputs loaded with 3KΩ to GND,
TAMB = +25°C
Ω VCC = V+ = V- = 0V, VOUT = ±2V
mA VOUT = 0V
µA VCC = 0V or 3.0V to 5.5V, VOUT = ±12V,
Drivers disabled
Date: 06/28/04
SP3223EU/3243EU +3.0V to +5.5V RS-232 Transceivers
2
© Copyright 2004 Sipex Corporation