 English |
|
|
|
|
|
|
|
| SP26LV431 Datasheet, PDF (2/13 Pages) Sipex Corporation – High Speed, +3.3V Quad RS-422 Differential Line Driver | |||
| |||
| ◁ |
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at
these ratings or any other above those indicated in the operation sections
of the specifications below is not implied. Exposure to absolute
maximum rating conditions for extended periods of time may affect
reliability and cause permanent damage to the device.
VCC........................................................................................0.5V to 7.0V
VIN (DC Input Voltage).............................................-1.5V to (VCC + 1.5V)
VOUT (DC Output Voltage)......................................................-0.5V to 7V
I,
IK
I
OK
(Clamp
Diode
Current)........................................................±20mA
IOUT (DC Output Current, per pin)................................................±150mA
I
CC
(DC
V
CC
or
GND
Current,
per
pin)..........................................±150mA
TSTG (Storage Temperature Range)...............................-65°C to +150°C
Storage Temperature....................................................-65°C to +150°C
Power Dissipation Per Package
16-pin PDIP (derate 14.3mW/oC above +70oC).........................1150mW
16-pin NSOIC (derate 13.6mW/oC above +70oC)......................1100mW
ELECTRICAL CHARACTERISTICS
Unless otherwise noted, the following specifications apply for VCC = +3.0V to +3.6V with Tamb = 25°C and all MIN
and MAX limits apply across the recommended operating temperature range.
DC PARAMETERS
MIN. TYP. MAX. UNITS
CONDITIONS
Supply Voltage, VCC
3.0
3.6
V
DC Input or Output Voltage, VIN or VOUT
VCC
V
Input Electrical Characteristics
Input Rise or Fall Times, tr or tf
HIGH Level Input Voltage, VIH
LOW Level Input Voltage, VIL
Output Electrical Characteristics
3
ns
2.0
V
0.8
V
HIGH Level Output Voltage, VOH
2.5 2.9
LOW Level Output Voltage, VOL
0.2 0.5
Differential Output Voltage, VT
2.0 2.7
Difference in Differential Output, |VT| - |VT|
0.4
Common Mode Output Voltage, VOS
3.0
Difference in Common Mode Output, |VOS -VOS|
0.4
V
VIN = VIH or VIL, IOUT = -20mA
V
VIN = VIH or VIL, IOUT = 20mA
V RL = 100â¦, Note 1
V RL = 100â¦, Note 1
V RL = 100â¦, Note 1
V RL = 100â¦, Note 1
Quiescent Supply Current
ICC
Tri-state Output Leakage Current, IOZ
Output Short Circuit Current, ISC
Output Leakage Current Power Off
IOFF
IOFF
100
±2.0
-30
-150
µA VIN = VCC or GND, Note 2
µA VOUT = VCC or GND,
ENABLE = VIL,
ENABLE = VIH
mA VIN = VCC or GND, Notes 1 and 3
100
-100
µA VCC = 0V, VOUT = 6V, Note 1
µA VCC = 0V, VOUT = -0.25V, Note 1
Rev: A Date: 3/08/04
SP26LV431 High Speed, +3.3V Quad RS-422 Differential Line Driver
2
© Copyright 2004 Sipex Corporation
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese