SP230A Datasheet, PDF (2/17 Pages) Sipex Corporation – +5V Powered Multi-Channel RS-232 Drivers/Receivers

ABSOLUTE MAXIMUM RATINGS
This is a stress rating only and functional operation of the device at
these or any other conditions above those indicated in the operation
sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods of time may affect
reliability.
V +6V _CC ...............................................................................................................................................................
V (Vcc–0.3V) to +13.2V ⁺ ...................................................................................................................
V 13.2V ^– .............................................................................................................................................................
Input Voltages:
T –0.3 to (Vcc +0.3V) _IN .......................................................................................................................
R ±30V _IN ............................................................................................................................................................
Output Voltages:
T (V+, +0.3V) to (V–, –0.3V) _OUT .................................................................................................
R –0.3V to (Vcc +0.3V) _OUT ..............................................................................................................
Short Circuit Duration:
T Continuous _OUT .........................................................................................................................................
Power Dissipation:
CERDIP .............................................................................. 675mW
(derate 9.5mW/°C above +70°C)
Plastic DIP .......................................................................... 375mW
(derate 7mW/°C above +70°C)
Small Outline ...................................................................... 375mW
(derate 7mW/°C above +70°C)
ELECTRICAL CHARACTERISTICS
All units Vcc=+5V±10%; except SP235A/B, Vcc=+5V±5%; All specifications T_MIN to T_MAX unless otherwise noted.
PARAMETERS
MIN. TYP. MAX.
UNITS
CONDITIONS
POWER REQUIREMENTS
Vcc Power Supply Current
5
10
mA
No load, T_A= +25°C
Shutdown Supply Current
LOGIC INPUTS
Input Logic Threshold
Low
High
2.0
Logic Pullup Current
RS-232 INPUTS
RS-232 Input Voltage Range -30
RS-232 Input Threshold
Low
0.8
High
RS-232 Input Hysteresis
0.2
RS-232 Input Resistance
3
1
10
0.8
15
200
+30
1.2
1.7
2.4
0.5
1.0
5
7
µA
T_A = +25°C
Volts
Volts
µA
Volts
Volts
Volts
Volts
kOhms
T_IN ; EN, SD
T_IN ; EN, SD
T_IN = 0V
Vcc = 5V, T_A = +25°C
Vcc = 5V, T_A = +25°C
Vcc = 5V
T_A = +25°C, -15V ≤ V_IN ≤ +15V
LOGIC OUTPUTS
Output Voltage
Low
High
Output Leakage Current
RS-232 OUTPUTS
Output Enable Time
Output Disable Time
Propagation Delay
Instantaneous Slew Rate
0.4
3.5
0.05
±10
400
250
1.5
30
RS-232 OUTPUTS
Transition Region Slew Rate
3
Output Voltage Swing
±5
±9
Volts
Volts
µA
ns
ns
µs
V/µs
V/µs
Volts
I_OUT = 3.2mA
I_OUT = 1.0mA
EN = V_CC, 0V≤V_OUT ≤Vcc
SP235A/B, SP236A/B,
SP241A/B
SP235A/B, SP236A/B,
SP241A/B
RS232 to TTL
C_L = 10pF, R_L= 3–7kΩ;
T_A = +25°C
C_L = 2500pF, R_L= 3kΩ;
measured from +3V to -3V or
-3V to +3V
All transmitter outputs loaded
with 3kΩ to Ground
Output Resistance
300
RS-232 Output Short Circuit Current
±10
Ohms
mA
V_CC= 0V; V_OUT = ±2V
Infinite duration
Date: 8/3/04
+ 5V Powered Multi-Channel RS-232 Drivers/Receivers
2
© Copyright 2004 Sipex Corporation