English
Language : 

SP1490E Datasheet, PDF (2/10 Pages) Sipex Corporation – Full Duplex RS-485 Transceivers
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at
these ratings or any other above those indicated in the operation sections
of the specifications below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may affect reliability.
VCC...................................................................................................+7V
Input Voltages
Drivers................................................-0.5V to (VCC+0.5V)
Receivers..................................................................±14V
Output Voltages
Drivers......................................................................±14V
Receivers...........................................-0.5V to (VCC+0.5V)
Storage Temperature....................................................-65˚C to +150˚
Power Dissipation.....................................................................1000mW
TMIN to TMAX and VCC = 5V ± 5% unless otherwise noted.
PARAMETERS
MIN.
SP1490E/1491E DRIVER
DC Characteristics
Differential Output Voltage
3.5
Differential Output Voltage
2
TYP.
Differential Output Voltage
1.5
Change in Magnitude of Driver
Differential Output Voltage for
Complimentary States
Driver Common-Mode
Output Voltage
Input High Voltage
2.0
Input Low Voltage
Input Current
Driver Short-Circuit Current
VOUT = HIGH
VOUT = LOW
SP1490E/1491E DRIVER
AC Characteristics
Maximum Data Rate
Driver Input to Output
20
30
Driver Input to Output
30
Driver Skew
Driver Rise or Fall Time
8
SP1491E only
Driver Enable to Output High
20
Driver Enable to Output Low
40
Driver Disable Time from Low
40
Driver Disable Time from High
40
ELECTRICAL CHARACTERISTICS
MAX. UNITS CONDITIONS
VCC Volts
VCC Volts
VCC Volts
Unloaded; R = ∞ ; see figure 1
With Load; R = 50Ω; (RS422);
see figure 1
With Load; R = 27Ω; (RS485); see figure 1
0.2 Volts
3 Volts
Volts
0.8 Volts
±10 µA
±250 mA
±250 mA
R = 27Ω or R = 50Ω; see figure 1
R = 27Ω or R = 50Ω; see figure 1
Applies to D
Applies to D
Applies to D
-7V ≤ VO ≤ +12V
-7V ≤ VO ≤ +12V
Mbps
40 ns
40 ns
5 ns
20
ns
70 ns
70 ns
70 ns
70 ns
tR/F; RDIFF = 54Ω, CL1 = CL2 = 100pF;
see figures 3 and 6
tR/F; RDIFF = 54Ω, CL1 = CL2 = 100pF;
see figures 3 and 6
see figures 3 and 6,
tR/F = | tDPLH - tDPHL |
From 10% to 90%; RDIFF = 54Ω,
CL1 = CL2 = 100pF; see figures 3 and 6
tR/F
CL1 = CL2 = 100pF; see figures
4 and 7; S2 closed
CL1 = CL2 = 100pF; see figures
4 and 7; S1 closed
CL1 = CL2 = 100pF; see figures
4 and 7; S1 closed
CL1 = CL2 = 100pF; see figures
4 and 7; S2 closed
Date: 5/18/04
SP1490E/1491E Full Duplex RS-485 Transceivers
2
© Copyright 2004 Sipex Corporation