SP3222EB Datasheet, PDF (14/20 Pages) Sipex Corporation – True +3.0V to +5.5V RS-232 Transceivers

For the Human Body Model, the current
limiting resistor (R_S) and the source capacitor
(C )
S
are
1.5kΩ
an
100pF,
respectively.
For
IEC-1000-4-2, the current limiting resistor (R_S)
and the source capacitor (C_S) are 330Ω an
150pF, respectively.
The higher C value and lower R value in the
S
S
IEC1000-4-2 model are more stringent than the
Human Body Model. The larger storage capacitor
injects a higher voltage to the test point when SW2
is switched on. The lower current limiting resistor
increases the current charge onto the test point.
30A
15A
0A
t=0ns
t➙
t=30ns
Figure 20. ESD Test Waveform for IEC1000-4-2
Device Pin
Tested
Driver Outputs
Receiver Inputs
Human Body
Model
±15kV
±15kV
Table 3. Transceiver ESD Tolerance Levels
IEC1000-4-2
Air Discharge Direct Contact
±15kV
±15kV
±8kV
±8kV
Level
4
4
Date:02/27/05
SP3222EB/3232EB True +3.0 to +5.5V RS-232 Transceivers
14
© Copyright 2005 Sipex Corporation