SPX1202 Datasheet, PDF (1/11 Pages) Sipex Corporation – 600mA Low Dropout NPN Voltage Regulator

®
SPX1202
600mA Low Dropout Linear Regulator
FEATURES
APPLICATIONS
■ Guaranteed 600mA Output
■ SCSI-II Active Terminator
■ Three Terminal Adjustable or Fixed
2.5V, 3V and 3.3V
■ Portable/ Palm Top / Notebook
Computers
■ Low Quiescent Current
■ Battery Chargers
■ Low Dropout Voltage of 1.1V at Full Load ■ Disk Drives
■ 0.2% Line and 0.3% Load Regulation
■ Portable Consumer Equipment
■ Voltage Temperature Stability 0.05%
■ Portable Instrumentation
■ Overcurrent and Thermal Protection
■ SMPS Post-Regulator
■ Available Packages: SOT-223,TO-252,
TO-220, and TO-263
Now Available in Lead Free Packaging
Refer to page 6 for pinouts.
DESCRIPTION
The SPX1202 is a low power positive-voltage regulator designed to satisfy moderate power
requirements with a cost effective, small footprint solution. This device is an excellent choice for
use in battery-powered applications and portable computers. The SPX1202 features very low
quiescent current and a low dropout voltage of 1.1V at a full load. As output current decreases,
quiescent current flows into the load, increasing efficiency. SPX1202 is available in adjustable
or fixed 2.5V, 3V and 3.3V output voltages.
The SPX1202 is offered in several 3-pin surface mount packages: SOT-223, TO-252, TO-220
and TO-263. An output capacitor of 10µF provides unconditional stability while a smaller 2.2µF
capacitor is sufficient for most applications.
BLOCK DIAGRAM
V_IN
Current Limit
+
-
I_CL
AMP
V_OUT
Date: 5/25/04
Thermal Limit
I _TL
V_REF
ADJ/GND
I_ADJ ~–50µA
SPX1202 600mA Low Dropout Positive Linear Regulator
1
© Copyright 2004 Sipex Corporation