|
SPX1083 Datasheet, PDF (1/5 Pages) Sipex Corporation – 8A Low DropOut Voltage Regulator Adjustable & Fixed 3.3V | |||
|
FEATURES
⢠Adjustable Output Down to 1.2V or Fixed 3.3V & 5V
⢠Output Current of 8A
⢠Low Dropout Voltage
⢠Extremely Tight Load and Line Regulation
⢠Current & Thermal Limiting
⢠Standard 3-Terminal Low Cost TO-220
⢠Similar to Industry Standard LT1083/LT1584
SPX1083
8A Low DropOut Voltage Regulator
Adjustable & Fixed 3.3V
APPLICATIONS
⢠Powering Intel Pentium µP from +5V Supplies
⢠Power PCï Supplies
⢠SMPS Post-Regulator
⢠High Efficiency âGreenâ Computer Systems
⢠High Efficiency Linear Power Supplies
⢠Portable Instrumentation
⢠Constant Current Regulators
⢠Adjustable Power Supplies
⢠Battery Charger
PRODUCT DESCRIPTION
The SPX1083 is a low power 8A Adjustable Voltage Regulator that is very easy to use. It requires only 2 external resistors to set the
output voltage. This device is an excellent choice when using Powering Intel Microprocessor to convert from +5V to 3.3V supplies,
and as a post regulator for switching supplies applications. The SPX1083 features low dropout of a maximum 1.5 volts.
The SPX1083 offers full protection against over-current faults, reversed input polarity, reversed load insertion, over temperature
operation, and positive and negative transient voltage. On-Chip trimming adjusts the reference voltage to 1%. The IQ of this device
flows into the load which increases efficiency.
The SPX1083 is offered in a 3-pin TO-220 package compatible with older 3-terminal regulators. For a 5A low dropout regulator refer
to the SPX1083 datasheet.
PIN CONNECTIONS
TO-220-3 (U)
SPX1083
123
ADJ/GND VOUT VIN
Front View
Rev. 10/23/00
|
▷ |